$95 HD/LINKer - Invensys Rail

MCF MANAGER
Document No.: SIG-00-97-08 Version: C
Figure 11-13. MCF Transfer Dialog Boxes
2. On the Selected tab, review the Selected MCFs and MEFs listed in the Files to be transferred
list.
3. If the MCF and MEF files required for transfer are listed, select a destination drive and directory
from the Target Directory list and the directory list below it.
4. Select the Create Installation Directories in target drive check box as required.
5. Click on the Copy button.
The Selected files are copied to the target directory.
6. If the required MCF or MEF files are not listed in the File to be transferred list, click on the
General tab.
7. Within the Group Selection section, select a Line name from the Line Name list. Lines can also
be selected by number from the Line Number list.
8. Select a Group from the Group Name list. A Group can also be selected by number from the
Group Number list or by milepost designation from the MilePost list. Alternately, select the
Include All Groups check box to include all Groups of the Line.
11-12