$95 HD/LINKer - Invensys Rail

SETUP
5.1.1.2 Select a Database
Select an existing database as follows:
1. Click on the Select button. The Select an existing Database dialog box (figure 5-4) appears.
Document No.: SIG-00-97-08 Version: C
Figure 5-4. Select An Existing Database Dialog Box
2. Select the database file name from the database list. Click on the Open button.
NOTE
If the selected database is incompatible with the
current HD/LINKer version, the Upgrade Database
dialog box (figure 5-5) appears:
Figure 5-5. Upgrade Database Dialog Box
Click OK to upgrade the selected database. Otherwise click Cancel.
5-4