$95 HD/LINKer - Invensys Rail

MCF MANAGER
Document No.: SIG-00-97-08 Version: C
Figure 11-14. Place MCF In Service Dialog Boxes
2. Enter the In Service UCN value in the In Service UCN field, as required.
3. Click on the OK button.
The Place MCF In Service dialog box closes, and the MCF Status field of the MCF Manager
changes from Approved to In Service.
11.7.2 Take MCF Out of Service
An In-Service MCF is taken out of service as follows:
Figure 11-15. Take MCF Out of Service Dialog Boxes
1. Click on the MCF Manager Service button. One of two Take MCF Out of Service dialog
boxes, figure 11-15, appears. The dialog box shown on the right is the default.
Clicking on the Cancel button closes the dialog box without saving any changes.
2. Enter the Out of Service UCN value in the Out of Service UCN field, as required.
3. Click on the OK button. The Take MCF Out of Service dialog box closes, and the MCF
Status field of the MCF Manager changes from In Service to Out of Service.
11-14