$95 HD/LINKer - Invensys Rail

Document No.: SIG-00-97-08 Version: C
SECTION IX
VIRTUAL CIRCUIT EDITOR
The Virtual Circuit Editor allows you to perform the following functions:
� Select line and group data for specific railroad territories.
� Select and configure the I/O modules for each group.
� Create the virtual circuits between groups.
9.1 LINE SELECTION
9-1
VIRTUAL CIRCUIT EDITOR
A Line Controller can be selected and a Line can be added, edited, or deleted by means of
the Line dialog box (figure 9-1). To access the Line dialog box, click on the Line button (see
right) on the Circuit I/O Tool Bar. Clicking on the Cancel button closes the dialog box without
saving any changes.
9.1.1 Line Controller
Select a Line Controller as follows:
Figure 9-1. Line Dialog Box
1. Select the required communications equipment from the Type list.
2. Select the corresponding node number from the Node list.