$95 HD/LINKer - Invensys Rail

LINE MCF TRANSFER PROCEDURES
Document No.: SIG-00-97-08 Version: C
Figure 14-4. Select a Database Dialog Box
4. Select the transfer directory and click on the Open button.
The Select A Database dialog box closes and the selected directory appears in the Select
Check In Database window of the Check In tab. A list of the Groups of the check-in Line
appears in the Groups window.
Clicking on the Cancel button closes the Select A Database dialog box without showing the
selected database or Line Groups.
5. Verify that the information shown in the Groups window is correct.
6. Click on the OK button at the bottom of the Check In/Out Database dialog box.
The Transfer database overwrites the corresponding line data of the Master ATCS database and
then the COPY MCFs dialog box, figure 14-5, appears.
7. Click on the OK button.
Figure 14-5. Copy MCFs Dialog Box
14-7