© 2006 by Taylor & Francis Group, LLC

Corrosion Testing — Practice 153
26. Bard, A.J. and Faulkner, L.R., Electrochemical Methods, John Wiley & Sons, New
York, 1980, chap. 6.
27. Glicinski, A.G. and Hegedus, C.R., Prog. Org. Coat., 32, 81, 1997.
28. Joanicot, M., Granier, V. and Wong, K., Prog. Org. Coat., 32, 109, 1997.
29. Gerharz, B., et al., Prog. Org. Coat., 32, 75, 1997.
30. Tzitzinou, A. et al., Prog. Org. Coat., 35, 89, 1999.
31. Forsgren, A. and Persson, D., Changes in the Surface Energy of Steel Caused by
Acrylic Waterborne Paints Prior to Cure, SCI Rapport 2000:5E. Swedish Corrosion
Institute (SCI), Stockholm, 2000.
32. Almeida, E., Balmayore, M. and Santos, T., Prog. Org. Coat., 44, 233, 2002.
33. Shaw, D., Introduction to Colloid and Surface Chemistry, 4th ed., Butterworth-
Heinemann Ltd., 1991, chapters 3 and 5.
34. Kim, K.S, Winograd, N. and Davis, R.E., J. Amer. Chem. Soc., 93, 6296, 1971.
35. Skerry, B.S. and Eden, D.A., Prog. Org. Coat., 15, 269, 1987.
36. Chen, C.T. and Skerry, B.S., Corrosion, 47, 598, 1991.
37. Ström, M. and Ström. G., SAE Technical Paper Series, 932338. Society of Automotive
Engineers, Warrendale, PA, 1993.
38. Ström, M., Utviklingen av metallbelegg i bilindustrin: Status, trender og Volvos
erfaringer, in Proc Overflatedager ’92, Trondheim, 1992. (in Norwegian)
39. LaQue, F.L., Marine Corrosion, Wiley, New York, 1975.
40. Lambert, M.R., et al., Ind. Eng. Chem. Prod. Res. Dev., 24, 378, 1985.
41. Lyon, S.B. et al., Corrosion, 43, 12, 1987.
42. Timmins, F.D., J. Oil Color Chem. Assn., 62, 131, 1979.
43. Funke, W., J. Oil Color Chem. Assn., 62, 63, 1979.
44. Skerry, B.S. and Simpson, C.H., Corrosion, 49, 663, 1993.
45. Townsend, H.E., Development of an improved laboratory corrosion test by the
automotive and steel industries, in Proc. 4th Annual ESD Advanced Coating Conference,
Dearborn, MI, 8-10 November 1994. Engineering Society of Detroit (ESD),
1994.
46. Appleman, B., J. Prot. Coat. Linings, 6, 71, 1989.
47. Struemph, D.J. and Hilko, J., IEEE Trans. on Power Delivery, PWRD-2, 823,
1987.
48. Chong, S.L., Comparison of laboratory testing method for bridge coatings, in Proc.
4th World Congress on Coating Systems for Bridge and Steel Structures Bridging the
Environment, St. Louis, MO, 1995.
49. Rommal, H.E.G. et al., Accelerated test development for coil-coated steel building
panels, in Proc. Corrosion ’98, San Diego, CA, National Association of Corrosion
Engineers (NACE), 1998, Paper 356.
50. Forsgren, A. and Palmgren, S., Salt spray test vs. field results for coated samples: part I,
SCI Rapport 1998:4E, Swedish Corrosion Institute (SCI), Stockholm, 1998.
51. Forsgren, A., Rendahl, B. and Appelgren, C., Salt spray test vs. field results for coated
samples: part II, SCI Rapport 1998:6E, Swedish Corrosion Institute (SCI), Stockholm,
1998.
52. Appleman, B.R., Bruno, J.A., and Weaver, R.E.F., Performance of Alternate Coatings
in the Environment (PACE) Volume I: Ten Year Field Data, FHWA-RD-89-127, U.S.
Federal Highway Administration, Washington D.C., 1989.
53. Appleman, B.R., Weaver, R.E.F. and Bruno, J.A., Performance of Alternate Coatings
in the Environment (PACE) Volume II: Five Year Field Data and Bridge Data of
Improved Formulations, FHWA-RD-89-235, U.S. Federal Highway Administration,
Washington D.C., 1989.
© 2006 by Taylor & Francis Group, LLC