Corrosion Testing — Practice 153 26. Bard, A.J. and Faulkner, L.R., Electrochemical Methods, John Wiley & Sons, New York, 1980, chap. 6. 27. Glicinski, A.G. and Hegedus, C.R., Prog. Org. Coat., 32, 81, 1997. 28. Joanicot, M., Granier, V. and Wong, K., Prog. Org. Coat., 32, 109, 1997. 29. Gerharz, B., et al., Prog. Org. Coat., 32, 75, 1997. 30. Tzitzinou, A. et al., Prog. Org. Coat., 35, 89, 1999. 31. Forsgren, A. and Persson, D., Changes in the Surface Energy of Steel Caused <strong>by</strong> Acrylic Waterborne Paints Prior to Cure, SCI Rapport 2000:5E. Swedish Corrosion Institute (SCI), Stockholm, 2000. 32. Almeida, E., Balmayore, M. and Santos, T., Prog. Org. Coat., 44, 233, 2002. 33. Shaw, D., Introduction to Colloid and Surface Chemistry, 4th ed., Butterworth- Heinemann Ltd., 1991, chapters 3 and 5. 34. Kim, K.S, Winograd, N. and Davis, R.E., J. Amer. Chem. Soc., 93, 6296, 1971. 35. Skerry, B.S. and Eden, D.A., Prog. Org. Coat., 15, 269, 1987. 36. Chen, C.T. and Skerry, B.S., Corrosion, 47, 598, 1991. 37. Ström, M. and Ström. G., SAE Technical Paper Series, 932338. Society of Automotive Engineers, Warrendale, PA, 1993. 38. Ström, M., Utviklingen av metallbelegg i bilindustrin: Status, trender og Volvos erfaringer, in Proc Overflatedager ’92, Trondheim, 1992. (in Norwegian) 39. LaQue, F.L., Marine Corrosion, Wiley, New York, 1975. 40. Lambert, M.R., et al., Ind. Eng. Chem. Prod. Res. Dev., 24, 378, 1985. 41. Lyon, S.B. et al., Corrosion, 43, 12, 1987. 42. Timmins, F.D., J. Oil Color Chem. Assn., 62, 131, 1979. 43. Funke, W., J. Oil Color Chem. Assn., 62, 63, 1979. 44. Skerry, B.S. and Simpson, C.H., Corrosion, 49, 663, 1993. 45. Townsend, H.E., Development of an improved laboratory corrosion test <strong>by</strong> the automotive and steel industries, in Proc. 4th Annual ESD Advanced Coating Conference, Dearborn, MI, 8-10 November 1994. Engineering Society of Detroit (ESD), 1994. 46. Appleman, B., J. Prot. Coat. Linings, 6, 71, 1989. 47. Struemph, D.J. and Hilko, J., IEEE Trans. on Power Delivery, PWRD-2, 823, 1987. 48. Chong, S.L., Comparison of laboratory testing method for bridge coatings, in Proc. 4th World Congress on Coating Systems for Bridge and Steel Structures Bridging the Environment, St. Louis, MO, 1995. 49. Rommal, H.E.G. et al., Accelerated test development for coil-coated steel building panels, in Proc. Corrosion ’98, San Diego, CA, National Association of Corrosion Engineers (NACE), 1998, Paper 356. 50. Forsgren, A. and Palmgren, S., Salt spray test vs. field results for coated samples: part I, SCI Rapport 1998:4E, Swedish Corrosion Institute (SCI), Stockholm, 1998. 51. Forsgren, A., Rendahl, B. and Appelgren, C., Salt spray test vs. field results for coated samples: part II, SCI Rapport 1998:6E, Swedish Corrosion Institute (SCI), Stockholm, 1998. 52. Appleman, B.R., Bruno, J.A., and Weaver, R.E.F., Performance of Alternate Coatings in the Environment (PACE) Volume I: Ten Year Field Data, FHWA-RD-89-127, U.S. Federal Highway Administration, Washington D.C., 1989. 53. Appleman, B.R., Weaver, R.E.F. and Bruno, J.A., Performance of Alternate Coatings in the Environment (PACE) Volume II: Five Year Field Data and Bridge Data of Improved Formulations, FHWA-RD-89-235, U.S. Federal Highway Administration, Washington D.C., 1989. <strong>©</strong> <strong>2006</strong> <strong>by</strong> <strong>Taylor</strong> & <strong>Francis</strong> <strong>Group</strong>, <strong>LLC</strong>
154 Corrosion Control Through Organic Coatings 54. Appleman, B.R., Weaver, R.E.F. and Bruno, J.A., Performance of Alternate Coatings in the Environment (PACE) Volume III: Executive Summary, FHWA-RD-89-236, U.S. Federal Highway Administration, Washington D.C., 1989. 55. Appleman, B.R. and Campbell, P.G., J. Coat. Technol., 54, 17, 1982. 56. Lyon, S.B., Thompson, G.E. and Johnson, J.B., Materials evaluation using wet-dry mixed salt spray tests, in New Methods for Corrosion Testing of Aluminum Alloys, ASTM STP 1134, V.S. Agarwala and G.M. Ugiansky, Eds., American Society for Testing and Materials, Philadelphia, PA, 1992, 20. 57. Harrison, J.B. and Tickle, T.C., J. Oil Color Chem. Assn., 45, 571, 1962. 58. Simpson, C.H, Ray, C.J. and Skerry, B.S., J. Prot. Coat. Linings, 8, 28, 1991. 59. Smith, D.M. and Whelan, G.W., SAE Technical Paper Series, 870646, Society of Automotive Engineers, Warrendale, PA, 1987. 60. Nowak, E.T., Franks, L.L. and Froman, G.W., SAE Technical Paper Series, 820427, Society of Automotive Engineers, Warrendale, PA, 1982. 61. Standish, J.V., Whelan, G.W. and Roberts, T.R., SAE Technical Paper Series, 831810. Society of Automotive Engineers, Warrendale, PA, 1983. <strong>©</strong> <strong>2006</strong> <strong>by</strong> <strong>Taylor</strong> & <strong>Francis</strong> <strong>Group</strong>, <strong>LLC</strong>