CANopen Basics Instruction Manual pdf - Kuhnke
CANopen Basics Instruction Manual pdf - Kuhnke
CANopen Basics Instruction Manual pdf - Kuhnke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.1.8 Transfer the Data to the PLC<br />
Project Setup<br />
The next thing you need to do is to transfer the data to the<br />
configuration master and the <strong>CANopen</strong> manager. In our<br />
case, ProfiControl 680V (PLC1) fulfills both tasks.<br />
If you are working with <strong>Kuhnke</strong> control units running<br />
KUBES programs, you will first of all stay offline to copy<br />
the data files to the KUBES project folders where KUBES<br />
will pick them up to transfer them into the control unit.<br />
Skip chapter "Prepare the KUBES Project" if the KUBES<br />
project for this PLC already exists (5.1.8.1).<br />
5.1.8.1 Prepare the KUBES Project<br />
• Start KUBES<br />
• Create a project for Profi Control 680V and name it<br />
PLC1.<br />
5.1.8.2 Copy the <strong>CANopen</strong> Data to the KUBES Project<br />
• Go back to Pro<strong>CANopen</strong> and load the network project<br />
called PLC1.<br />
• Right-click on the icon of PLC1 and select Export to<br />
KUBES from the menu:<br />
E 615 GB 53<br />
06.02.2008
Change language