Annen avdeling PROTOKOLL Annen avdelings ... - Patentstyret
Annen avdeling PROTOKOLL Annen avdelings ... - Patentstyret
Annen avdeling PROTOKOLL Annen avdelings ... - Patentstyret
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Annen</strong> avd. sak nr. 7592 77<br />
Around this National under Charley Johnson were carrying out an unpaid study for another<br />
client, Hans Hopper of BP which was laterally called NASPS (New Approach to Subsea<br />
Production Systems) running in parallel with a funded BP study called DISP (Driverless<br />
Intervention Subsea Production). This hanger was then taken up and reconfigured to a 7-1/16<br />
x 2-1/16 concentric tubing hanger consisting of an annular sleeve in place of the poppet<br />
valves. Further variants of this type of hanger conceived to carry power for down hole pumps<br />
and/or electrical single feedback for pressure and temperature monitoring. These hangers<br />
were not suitable for pulling through the tree valve block due to the larger annulus area<br />
required by BP. This system was conceptually developed into a full system complete with<br />
single trip running tools, split actuators ROV operable and was laterally re-configured to<br />
operate by electric power.<br />
Hans Hopper (BP) built a full 1/8T" scale model for a 8-slot template which was on display<br />
within the BP annex reception area and if my memory serves me correctly around 1986. The<br />
split actuator went on to a full developed project in its 5-1/8 form by Herman Hawkins of<br />
National supply in the states.<br />
The CC (customer consumption) drawing register was used for recording all proposed<br />
concepts specific for client review/consumption. The recorded date within this register was<br />
intended to be the start date but in practice and in most cases the register was filled in on<br />
completion. This register ran numerically and dated as and when the drawings were produced.<br />
There was a second register used for controlling the manufacturing drawings when awarded a<br />
project.<br />
Place and date 20/07/2009<br />
The Auld Laundry Thainstone<br />
Inverurie, Aberdeenshire, UK, AB51 5NT<br />
Signed Murray J. McIntosh."<br />
I nytt skriv av fredag den 23. januar 2010, innkommet sammen med diverse vedlegg, uttaler<br />
patenthavers fullmektig:<br />
"Vi viser til <strong>Annen</strong> <strong>avdeling</strong>s oversendelse av innsigers svar av 21. september 2009, innsigers<br />
svar og erklæringen fra Murray McIntosh som var vedlagt.<br />
Patenthaver opprettholder sin prinsipale påstand at tegningen CC-8009 (D9) aldri har vært<br />
allment tilgjengelig, og følgelig bør avvises som kjent teknikk, av følgende grunner:<br />
NY ERKLÆRING FRA HANS HOPPER<br />
Patenthaver har innhentet og vedlegger en ny erklæring fra Hans Hopper. I denne erklæringen<br />
gir Hopper en detaljert redegjørelse for betingelsene i oljeindustrien i den aktuelle perioden,<br />
og av den involverte teknikken. I argumentasjonen nedenfor vises det til denne erklæringen.r.<br />
VEDRØRENDE D9 OG ALLMEN TILGJENGELIGHET