Voltage References

MC10324
ELECTRICAL CHARACTERISTICS (TA = 25'C, Iref = 1.115 mA, load = 37.5!lto AGnd, VCC = VEE =-5.2 V, see Figure 1.)
I Characteristic I Symbol I Min I Typ I Max I Unit
TRANSFER CHARACTERISTICS
Resolution Res 8.0 8.0 8.0 Bits
Integral Nonlinearity INl -1/2 0 +1/2 lSB
Differential Nonlinearity DNl -1/2 0 +1/2 lSB
Monotonicity - Guaranteed·
Differential Gain DG -
Differential Phase DP -
OUTPUTS
Output Current at Out - (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) IEH- 0
Normal White (FH = 1 or DO - D7 = 1) INW- 1.75
Normal Black (DO - D7 = 0) Referred to Normal White INB- 16.6
Blank Referred to Normal Black (BlK = 1) IBlN- 1.32
Sync Relerred to Blank (SYNC = 1) ISYNC- 7.1
Output Voltage at Out - (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) VEH- 0
Normal White (FH = 1 or DO - D7 = 1) VNW- -67.8
Normal Black (DO - D7 = 0) Referred to Normal White VNB- -626
Blank Relerred to Normal Black (BlK = 1) VBlN- -50.6
Sync Referred to Blank (SYNC = 1) VSYNC- -270
Output Current at Out + (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) IEH+ 26.8
Normal White (FH = 1 or DO - D7 = 1) INW+ 25
Normal Black (DO - D7 = 0) Referred to Normal White INB+ -16.6
Blank Referred to Normal Black (BlK = 1) IBlN+ -1.32
Sync Referred to Blank (SYNC = 1) ISYNC+ -7.1
Output Voltage at Out + (Control Inputs = 0 Except as Noted)
Enhanced White (FH = BRT = 1) VEH+ -1016
Normal White (FH = 1 or DO - D7 = 1) VNW+ -949
Normal Black (DO - 07 = 0) Referred to Normal White VNB+ 626
Blank Referred to Normal Black (BlK = 1) VBlN+ 50.6
Sync Referred to Blank (SYNC = t) VSYNC+ 270
Output Matching ( IINB + I -IINB -I ) IFSER -50
Gain Error (Gray Scale at Out-) GER -50
Output Impedance (Gray Scale, -1.7 V < Vo < 0.3 V)
Output CapaCitance
Zo
Co
25
-
Glitch Energy (Clocked Mode)
At Midscale Transition (00-07 = 127 ... 128)
Due to Clock Feedthrough (DO - 07 = Constant)
Due to Data Feedthrough (Clock = Constant)
EGM
EGC
EGD
-
-
Peak Glitch Current (Clocked Mode)
At Midscale Transition (00- 07 = 127 ... 128) IGM -
Due to Clock Feedthrough (DO - 07 = Constant) IGC -
Due to Data Feedthrough (Clock = Constant) IGO -
POWER SUPPLIES
Supply Current VEE(O) = VEE(A) = - 5.72 V IEE(O) -80
Power Dissipation PD -
Power Supply Sensitivity at Outputs PSSO
(- 5.72 < VEE(O), VEE(A) < - 4.68 V) -100
VEE (D) Supply Rejection (VEE(O) = VEE (A) = - 5.2 V, f = 10kHz) PSRRO -
VEE(A) Supply Rejection (VEE(D) = VEE(A) = - 5.2 V, I = 10kHz) PSRRA -
MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA
6-81
1.0 - %
0.5 - Deg
*Guaranteed by linearity tests.
18 100 IIA
1.94 2.13 mA
17.7 18.7
1.43 1.54
7.7 8.3
-0.67 -3.75
-73 -77.6
-663 -694
-53.6 -56.6
-288 -308
28.8 30.6
26.8 28.5
-17.7 -18.7
-1.43 -1.54
-7.7 -8.3
-1080 -1132
-1005 -1057
663 694
53.6 56.6
288 308
mV
mA
mV
0 +50 IIA
0 +5.0 %
100 - kn
16 - pF
18 -
2.0 -
25 -
pV-sec
0.2 - mA
55 - IIA
0.5 - mA
-65 - mA
338 458 mW
20 +100
IIAIV
100 - dB
60 - dB
(continued)