Voltage References

MC3399
ELECTRICAL CHARACTERICISTICS (VIGN = + 12 V, IL = 150 mA, -40°C :s; T J = + 125°C, V Input = "1", unless otherwise noted.)'
Characteristics Symbol MIn
Operating Voltage VIGN(min) 4.5
Switch Voltage Drop (Saturation) VIGN-VO
VIGN = 4.5 V 10 = 150 mA TJ = 25°C -
10 = 200 mA TJ = -40°C -
10 = 125 mA TJ = 125°C -
VIGN = 12 V 10 = 425 mA TJ = 25°C -
10 = 550 mA TJ = -40°C -
VIGN = 16 V 10 = 375 mA TJ = 125°C -
Quiescent Current IGND
VIGN = 12 V 10 = 150 mA TJ = 25°C -
10 = 550 mA TJ = -40°C -
10 = 300 mA TJ = 125°C -
Output Current Limit (VO = 0 V) ISC -
Output Leakage Current (VIGN = 12 V, Input = "0") ILeak -
Input Voltage
High Logic State VIH 2.0
Low Logic State VIL -
Input Current
High Logic State (VIH = 5.5 V) IIH -
Low Logic State (VIL = 0.4 V) IlL -
Output Tum-On Delay lime tDLY(on) -
Input = "0" -+ "1", T J = +25°C (Figures 1 and 2)
Output Tum-OIl Delay lime
Input = "1" -+ "0", TJ = +25°C (Figures 1 and 2)
tDLY(off) -
Over Voltage Shutdown Threshold Vin(OV) 26
Output Turn-OIl Delay lime (T J = + 25°C) to Overvoltage Condition, tDLY -
Vin stepped from 12 V to 40 V, V:s; o.g Vo (Figures 1 and 2)
Output Recovery Delay lime (T J = + 25°C) tRCVY -
VIGN stepped from 40 V to 12 V, V 2: 0.9 Vo (Figures 1 and 2)
'Typical Values Represent Characteristics of Operation at T J = + 25°C.
Figure 1. Transient Response Test Circuit
NOTE:
"Depending on Load Current and Transient Duration, an Output Capacitor (CO) of
sufficient value may be used to hold up Output VoRage during the Transient, and
absorb Tum-off Delay Voltage Overshoot.
MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA
10-34
50n
Typ Max UnIt
- - V
0.2 0.5
0.3 0.5
0.3 0.5
0.3 0.7
0.3 0.7
0.4 0.7
12 50
25 100
10 50
V
mA
1.6 2.5 A
10 150 IJA
- -
- 0.8
120 -
20 -
V
IJA
50 - lIS
5.0 - lIS
31 36 V
2.0 - lIS
5.0 - lIS