25.02.2013 Views

Voltage References

Voltage References

Voltage References

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Special Functions<br />

Function<br />

Low Side Protected Switch<br />

High Side Driver Switch<br />

High Side TMOS Driver<br />

Mi-Bus Interface Stepper Motor<br />

Controller<br />

Quad Fuel Injector Driver<br />

Quad Fuel Injector Driver<br />

Octal Serial Output Switch<br />

Integral Alternator Regulator<br />

Darlington Drive Chip<br />

Peripheral Clamping Array<br />

Automotive Direction Indicator<br />

, "<br />

Features<br />

Single automotive low side switch having CMOS compatible input, 1.0 A<br />

maximum rating, with overcurrent, overvoltage, and thermal protection.<br />

Drives loads from positive side of power supply and protects against<br />

high voltage transients.<br />

Designed to drive and protect N-channel power MOSFETs used in high<br />

side switching applications. Has internal charge pump, externally<br />

programmed timer, and fault reporting.<br />

High noise immunity serial communication using Mi-Bus protocol to<br />

control relay drivers and motors in harsh environments. Four phase<br />

signals drive two phase motors in either half or full-step modes.<br />

Four low side switches with parallel CMOS compatible input control,<br />

:s 7.0 mA quiescent current, 0.25 Q r ds(ON) at 25°C independent<br />

outputs with 3.0 A current limiting and internal 65 V clamps.<br />

Four low side switches with parallel CMOS compatible input control,<br />

:s 5.0 mA quiescent current, 0.7 Q rds(ON) at 25°C independent outputs<br />

with 3.0 A current limiting and internal 65 V clamps.<br />

Eight low side switches having 8-bit serial CMOS compatible input<br />

control, serial fault reporting, :S 4.0 mA quiescent current, independent<br />

0.45 Q rds(ON) at 25°C outputs with 3.0 A minimum current limiting and<br />

internal 55 V clamps.<br />

Control device used in conjunction with an MCCF33096 Darlington<br />

companion device to monitor and control the field current in alternator<br />

charging systems. "Bumped" die for inverted mounting to substrate.<br />

Darlington companion device for MC33095 used to control the field<br />

current in alternator charging systems. "Bumped" die for inverted<br />

mounting to substrate.<br />

Protects up to six MPU 110 lines against voltage transients.<br />

Detects defective lamps and protects against overvoltage and short<br />

circuit hazards in automotive turn-signal applications. Replaces<br />

UAA 1041 with improved noise immunity.<br />

MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA<br />

10-3<br />

Sufllxi<br />

Cese Device<br />

T/221 , MC3392<br />

T-1/314D,<br />

DW1751G<br />

T/314D MC3399<br />

P/626, MC33091<br />

D1751<br />

DW/751G MC33192<br />

T/821C-02 MC33293<br />

T/821C-02 MC33295<br />

P!738 MC33298<br />

Flip-Chip MCCF33095<br />

Flip-Chip MCCF33096<br />

D1751 TCF6000<br />

P/626, UAA1041B<br />

D1751

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!