CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.1 Keypad Description<br />
Chapter 4 Software Index<br />
4.1.1Keypad Display and Operation <strong>Instruction</strong><br />
1. SEQ LED: 1_00 =1/2/3, LED Lit.<br />
2. FRQ LED: 1_06 = 1/2/3/4, LED Lit<br />
3. FWD LED: Forward Direction, LED action(Flash in stop, Keep Lit in operation).<br />
4. REV LED: Reverse Direction, LED action(Flash in stop, Keep Lit in operation).<br />
4-1<br />
Chapter 4 Software Index<br />
5. Four action of FUN、Hz/RPM、VOLT、AMP LED and display of four 7-segment display, refer to<br />
operation description of the keypad.<br />
6. LCD keypad without FUN, Hz/RPM, VOLT, AMP LED and FREQ.SET knob.<br />
Caution<br />
To avoid impairing the keypad, do not operate it with screwdriver or sharp and hard tool.<br />
Remote/Local Mode<br />
․Local mode – Operation Command by RUN/STOP key on keypad<br />
– Frequency Command by ▲▼ key on keypad<br />
․Remote mode – Operating Command by 1-00