CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4 Software Index<br />
4.2 Control Mode Selection<br />
7300CV Series inverter has three control modes:<br />
1. General Vector Control Mode<br />
2. VT Vector Control Mode (Special for Blower, Pump).<br />
3. V/F Control Mode。<br />
The user can choose these modes with the digital keypad according to the application characteristics.<br />
The factory setting is general vector control mode. Before operation, please set the control mode and<br />
the relative parameters of the motor in accordance with the following flow chart. (The Vector control<br />
mode only suits for the inverter with same capacity comparing to the motor, or a grade bigger or<br />
smaller one).<br />
※Note:<br />
V/F Control<br />
Control mode selection 0-00=2<br />
Set the following parameter:<br />
V/F Pattern 10-0<br />
Torque Boost 10-1<br />
<strong>Motor</strong> no load current 10-2 (
Change language