CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
CV7300 Instruction Manual - TECO-Westinghouse Motor Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4 Software Index<br />
4. When parameter 0-00 does set to 2, the keypad will display ‘Err2’ in performing Auto tuning.<br />
5. When VECTOR MODE control, 0-01~0-05 max. & min. value by the <strong>TECO</strong> standard motor<br />
specification limit(one more & one less level). When VF control, no district.<br />
4.3 7300CV Programmable Functions List<br />
Parameter<br />
Group No.<br />
0- Drive Operation Mode<br />
4-9<br />
Description<br />
1- Start/Stop and Frequency Control Modes<br />
2- <strong>Manual</strong>/Automatic Restart Modes<br />
3- Operating Parameters<br />
4- Digital Display Operation Mode<br />
5- Multifunction Input Terminals (MFIT)<br />
6- Jog, and Preset (MFIT) Speed Setting on Keypad<br />
7- Analog Input Signal Operation<br />
8- Multifunction Output Relays and Output Signal Operation<br />
9- Drive and Load Protection Modes<br />
10- Volts/Hz Pattern Operation Mode<br />
11- PID Operation Mode<br />
12- PID "Limits" and "Out of Range" Mode<br />
13- Communication Mode<br />
14- <strong>Motor</strong> Auto-Tuning Parameters<br />
15- Drive Status and Function Reset
Change language