A new face drilling rig for narrow tunnels and ... - Advanced Mining

ko M a t s U
Issue 04 | 2010
NEWS & REPORTS
Regional Waste Management and Recycling
Company builds on Flexibility in Operation with
the Komatsu Mobile Dredger PW-180-7!
In September the Heidemann Recycling GmbH & Co.
KG, a small business with its office in Eisfeld/Thueringen
made a decision for the Komatsu Mobile dredger
PW180-7. The dredger is not only the ideal companion for
the civil engineering and road construction, but also in
many other sectors like for example in disposal, recycling
and in demolition.
For 20 years, the family company Heidemann, a certified
recycling company in the South Thueringen region and
with 25 qualified staff, has been well known for processing
and recycling. From the very beginning, trust of the clients
has been the priority for Dag Heidemann, the managing
director. The trust in the machines and the responsible
Komatsu supplier “Schlüter für Baumaschinen” is another
important point in the course of business of the Heideman
company, because the success of qualitative work is also
built on that.
In the run-up, at the beginning of the year, already
Komatsu: PW180-7 in operation
a Komatsu wheel loader WA 470 LC-6 was added to the
modern machinery. It was the first Komatsu for Heidemann,
and it is used for transporting the material processed by
the PW180-7 from A to B into the crushing plant.
The PW180 is equipped with a concrete cutter to crush
concrete parts like for example railway ties. Due to its
quick change system the PW180-7 is an equipment carrier
for many fields of application. It is noteworthy that the 18
to mobile dredger is one of the most stable machines of
its category – a plus point in the decision to purchase.
Ergonomically formed operating devices like for example
joysticks with proportional control and a particularly low
noise pressurized cabin with automatic air-conditioning
create an agreeable work place for the driver. Without
further ado, roof protection and safety guards for front
screens are available for the breakage. The driver has
the option to adjust the oil flow of the auxiliary hydraulics
by himself. Furthermore, various pipings and pre-settings
ensure a quick change of equipment. Thus the hammer,
www.advanced-mining.com
136