03.03.2013 Views

A new face drilling rig for narrow tunnels and ... - Advanced Mining

A new face drilling rig for narrow tunnels and ... - Advanced Mining

A new face drilling rig for narrow tunnels and ... - Advanced Mining

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Issue 04 | 2010<br />

TRANSFER OF TECHNOLOGY<br />

frequency, time frequency-amplitude l<strong>and</strong>scape. The height of the l<strong>and</strong>scape characterizes the acceleration measured.<br />

The blue field represents a view descending vertically towards this l<strong>and</strong>scape. The colour code represented on the left<br />

characterizes the corresponding acceleration. In the diagram that can be seen below the abscissa, there is plotted the<br />

sequence of frequencies above the frequency. Clearly to see is the maximum at 511Hz. The frequencies that can be seen<br />

beside the calculated main frequency are a consequence of the fact that it is a matter of an excited continuum <strong>and</strong> not of<br />

a single degree-of-freedom- system, <strong>and</strong> that the vibrations get also excited by side effects in other ranges of frequency. It<br />

mainly concerns here excitations due to friction, bending vibrations, roll-over frequencies of bearings, etc.<br />

Fig. 23: FFT Analysis Lifting-Closing Gear 2500Hz<br />

Fig. 22:<br />

FFT Analysis Speed influence<br />

www.advanced-mining.com<br />

88

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!