A new face drilling rig for narrow tunnels and ... - Advanced Mining
A new face drilling rig for narrow tunnels and ... - Advanced Mining
A new face drilling rig for narrow tunnels and ... - Advanced Mining
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
As a rule, large drive units that have a great dead<br />
weight on the one h<strong>and</strong>, <strong>and</strong> that transmit <strong>and</strong> absorb high<br />
<strong>for</strong>ces on the other, require special constructions. When<br />
rating <strong>and</strong> dimensioning such flexible supports, the small,<br />
maximally admissible sur<strong>face</strong> pressure of the elastomers<br />
must be considered. If the structural shape does not<br />
allow, within the elastomers, a reduction of the transverse<br />
stresses, elastomers with fabric inserts will have to be<br />
given preference. Pneumatic springs are considered<br />
excellent vibration isolators. But they cannot be used in<br />
all zones, because of the extensive maintenance work<br />
required.<br />
Issue 04 | 2010<br />
Fig. 33:<br />
Flexible support of air<br />
conditioning unit<br />
Fig. 34:<br />
Flexible Support Lifting-Closing gear<br />
TRANSFER OF TECHNOLOGY<br />
• Vibration-insulated support of the drive units as well as of<br />
air-conditioners<br />
• Complete cladding of the machine houses by means of<br />
sound insulation cases featuring sound insulation factors<br />
that are considerably high. (Here, it is deemed absolutely<br />
necessary to point out that the insertion loss factor on<br />
a construction composed of sound insulation cases is<br />
considerably smaller than that given in the data sheets of<br />
the manufacturer <strong>for</strong> single elements.<br />
• Installation of sound absorbers at the openings required<br />
(e.g. <strong>for</strong> rope passage)<br />
• Installation of low-noise fans<br />
• Low-noise tooth of the gearboxes<br />
• Low speeds of the gearboxes, if possible<br />
• Frequency converters must have high frequency, if<br />
possible (lifts)<br />
• Small fall hight of material into the bin<br />
• Let always a material buffer in the bin; the bin must never<br />
be completely emptied<br />
• Cladding of the bin (dependent on the material to be<br />
h<strong>and</strong>led), <strong>and</strong> provide <strong>for</strong> a flexible support, if possible<br />
• Dust plants mainly working dry-mechanically are to be<br />
avoided, or respective sound insulation measures are to<br />
be planned commonly with the supplier.<br />
• Sound insulating cladding of large, sound-radiating<br />
sur<strong>face</strong>s<br />
www.advanced-mining.com<br />
92