BOGIES AND SUSPENSION - South Central Railway

CHAPTER 6 – BOGIES AND SUSPENSION
602 F. MATERIAL SPECIFICATION OF BOX (UIC) BOGIE
WAGON MAINTENANCE MANUAL
Page 34 of 121
Sr. Description of
Material
No. item
1. Bogie Sole Plate 8 mm thick plate to specification No. IS2062:
ST-42-W
2. Transom Top & Bottom plate 12 mm thick; Side Plate 8
mm thick , specification no. IS:2062 : ST-42-
WC
3. Headstock Channel Section of 200 x 75 x 7.5 mm,
specification no. IS:2062 : ST-42-WC
4. Diagonals Channel Section of 125 x 65 x 6 mm,
specification no. IS:2062 : ST-42-WC
5. Safety loop Steel plate 8 mm thickness, specification no.
bracket
IS:2062 : ST-42-WC
6. Retaining Ring Specification no. IS:2062 : ST-42-WC
7. Bogie Centre pivot Cast steel to specification no. IRS: M-2 CLA Gr
Top
I
8. Bogie Centre pivot Cast Steel Class A Gr I to specification No. IRS
Bottom
M2.
9. Centre pivot
Retainer
Steel Class IV to specification no. IS :2004.
10. Washer Top Steel ST-42-S to specification No. IS : 226
11. Washer Bottom Buna Synthetic rubber or India Rubber to
specification No. IRS-B-20
12. Centre Pivot Bolt Steel St-42-S to specification No. IS-226
13. Dust Shield for Mild steel sheet grade “O” to specification No.
bogie centre pivot IS-1079.
14. Side Bearer Cast steel class A grade I to specification no. M-
(Bottom) 2 IS-2004 or Class II ST-42-S to specification
No. IS:226.
15. Side Bearer (Top) Steel ST-42-S to specification No. IS:226.
16. Shackle pin Steel Class IV , M4 (Normalised)
17. Shackle Stone Steel class II or class S gr.I to specification No.
IS:2004 or IRS-M2.
18. Spring Shackle Steel class III to specification No. IS:2004 and
normalised
19. Shackle pin Steel class II to specification No. IS:2004 and
Retainer
normalized
20. Riveting Strip Plate of 6 mm thickness to specification No.
2062 St-42-WC.
21. Horn Cheek 20 mm thick plate to specification No. No. 2062
Packing
St-42-WC.