BOGIES AND SUSPENSION - South Central Railway
BOGIES AND SUSPENSION - South Central Railway
BOGIES AND SUSPENSION - South Central Railway
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHAPTER 6 – <strong>BOGIES</strong> <strong>AND</strong> <strong>SUSPENSION</strong><br />
Following type of springs are commonly used:<br />
WAGON MAINTENANCE MANUAL<br />
BROAD GAUGE<br />
Page 57 of 121<br />
Sr. Type of springs Free Plus Plus Plus<br />
No.<br />
camber 2mm 4mm 6mm<br />
A B C D<br />
1 10 plated IRS type of BOX<br />
BCX type wagons etc.<br />
47 49 51 53<br />
2 13 plated IRS type for 4<br />
wheeled wagon, 16.3t axle<br />
load (now being replaced by<br />
SK73560)<br />
76.2 78.2 80.2 82.2<br />
3 13 plated IRS type to Drg no.<br />
SK73560 for 4 wheeled<br />
wagon, (16.3t axle load)<br />
75.5 77.5 79.5 81.5<br />
4 9 plated laminated spring to<br />
Drg. No. WD-87024-S/1<br />
used on CRT wagons.<br />
58 60 62 64<br />
METER GAUGE<br />
SN Type of springs Free Plus 1.5 Plus Plus<br />
camber mm 3mm 5mm<br />
A B C D<br />
1 7 plate IRS type for 4<br />
wheelers wagons<br />
50.8 52.3 53.8 55.8<br />
2 7 plate IRS type for non<br />
standard wagons<br />
76 77.5 79 81<br />
3 9 plate IRS type for non<br />
standard 4 wheelers and 6<br />
wheelers wagons<br />
86 87.5 89 91<br />
4 9 plate for IRCA type wagons 51 52.5 54 56<br />
605 C. PROCEDURE FOR MANUFACTURE, REPAIR, TESTING & INSPECTION<br />
OF SPRINGS IN THE WORKSHOP<br />
a. The correct procedure for manufacture of laminated bearing springs has been<br />
prescribed in Board’s letter No: 76//M(W)/814/43 dated 12.3.64 and 3.6.68<br />
RDSO letter no: M&C/STC/2/1 dated 26.3.75 and MW/II/Springs dated<br />
18.7.77 (approved V, and IRS specification RS-68). The pamphlet<br />
“Laminated bearing spring failures- description classification and reporting”<br />
issued by RDSO in 1969, with a corrigendum in 1972, contains useful<br />
information on the subject and should be consulted.