coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>coM</strong>.<strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> <strong>UMTS</strong><br />
3 Functional description<br />
The <strong>coM</strong>.<strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> <strong>UMTS</strong> connects the telephone system to the GSM/<strong>UMTS</strong><br />
network. The device can be operated both in NT mode as well as TE mode, namely<br />
either as a “point to point“ connection (P - P) or as a “point to multipoint“ (PMP)<br />
connection. It is connected to a local S0 port of the telephone system.<br />
<strong>coM</strong>.<strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> <strong>UMTS</strong> is available as a two channel design. It is intended for<br />
use in the GSM/<strong>UMTS</strong> 850/1900/2100MHz network and GSM/GPRS/EDGE<br />
850/900/1800/1900 network, if suitable SIM cards are used.<br />
The use of the Sierra Wireless MC8775V cellular engines not only enables voice<br />
communications, but also the transmission (sending and receiving) of data, faxes and<br />
SMS using a PC and the USB interface for direct access to the cellular engines. The<br />
most important user facilities of the TA are:<br />
GSM/<strong>UMTS</strong> services:<br />
TS11 Voice, full rate and enhanced full rate, DTMF<br />
TS12 Emergency call function<br />
TS21 SMS, text and PDU mode<br />
Supporting services:<br />
CLIP Calling Line Identification Presentation<br />
CLIR Calling Line Identification Restriction<br />
CFU Call Forwarding Unconditional<br />
AoC Advice of Charge<br />
BAOC Block All Outgoing Calls<br />
BOIC Block Outgoing International Calls<br />
BAIC Block All Incoming Calls<br />
COLP Connected Line Identification Presentation<br />
Hardware interfaces:<br />
USB For programming and SMS<br />
RJ45 for connection to the TC system ISO 8877<br />
RJ45 for the synchroni<strong>sat</strong>ion port and <strong>ISDN</strong> network ISO 8877<br />
Cardholder for small 3V SIM cards<br />
SMA RF links for the GSM/<strong>UMTS</strong> antennas<br />
Power Supply Connector<br />
LEDs for displaying the operating condition<br />
Programming:<br />
Configuration of the device settings via the Windows application <strong>coM</strong><strong>sat</strong>.exe<br />
Remote servicing for changes to the programming, software updates, and traces<br />
Setting NT/TE mode via the configuration<br />
Call charge information can be set between 0 and 240 seconds<br />
Comfort suffix dialling (post selection dialling; positive and negative list)<br />
Channel analysis and output of the signal quality<br />
created: page: file:<br />
11/04/07 12 <strong>coM</strong><strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> Manual <strong>UMTS</strong>.doc<br />
Note Protection Mark according to DIN 34!