coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>coM</strong>.<strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> <strong>UMTS</strong><br />
3.3.16.1 Receive SMS<br />
To receive SMS messages, first select the reception channel and then click on the<br />
”Query” button. SMS messages that in the meantime have been stored on the SIM<br />
card for this recipient are now called up and shown in the “Received SMS“ list.<br />
However, only the date received and the phone number of the sender are shown in<br />
this box. The content of an SMS is displayed if an SMS is selected using the mouse<br />
pointer. The message text then appears in the box below, the phone number of the<br />
sender is displayed in the “Phone Number“ box.<br />
The following property must be noted for the receipt of SMS messages. As the<br />
received SMS messages are stored on the SIM card, the available memory is limited.<br />
However, to ensure access to the device via remote servicing, the oldest message is<br />
always deleted (if “Ignore SMS” is deactivated) to ensure that sufficient memory<br />
space is available for a new incoming message. The precise remote servicing<br />
sequence is described in the Remote Servicing chapter.<br />
3.3.16.2 Send SMS<br />
If an SMS message is to be sent, first select the channel and then enter the message<br />
text in the “Message Text“ box, whereby the message must not contain more than<br />
160 characters. To send the message, enter the number of the recipient in the<br />
“Phone Number“ box and then press the “Send“ button. The message is then sent.<br />
created: page: file:<br />
11/04/07 62 <strong>coM</strong><strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> Manual <strong>UMTS</strong>.doc<br />
Note Protection Mark according to DIN 34!