coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
coM.sat ISDN Basic UMTS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>coM</strong>.<strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> <strong>UMTS</strong><br />
3.3.14 Channel 1/2<br />
Figure 20: Channel 1/2<br />
The card for the specific entries for channel 1 (same for channel 2) is used for<br />
entering the necessary details for the channel.<br />
The SIM card ”PIN” must be entered first. This entry is mandatory if entry of a PIN is<br />
prescribed for the SIM card used. In case the SIM cards used don't require such an<br />
entry, the input box remains blank.<br />
If the GSM/<strong>UMTS</strong> network cannot provide real charge information, artificial charge<br />
information (phase) is produced by the ”AOC timer”. The AOC timer can be adjusted<br />
between 0 and 240 seconds.<br />
The default number is the number of the extension that is called for incoming calls if<br />
“Call Default Number“ has been selected. This number is also called if a caller does<br />
not dial anything.<br />
The sound volume of the microphone and handset for the GSM/<strong>UMTS</strong> channel can<br />
also be adjusted using this card if the preset level is insufficient. The preset values<br />
are 5 for “Microphone Attenuation“ and 4 for “Speaker Volume“. Both values can<br />
created: page: file:<br />
11/04/07 54 <strong>coM</strong><strong>sat</strong> <strong>ISDN</strong> <strong>Basic</strong> Manual <strong>UMTS</strong>.doc<br />
Note Protection Mark according to DIN 34!
Change language