Spot Vital Signs LXi Service Manual - Frank's Hospital Workshop

Service Manual Overview 17
Systolic and Diastolic
display: if MAP is turned on,
the screen toggles between
the systolic and diastolic
values, and the word “MAP”
and the MAP value.
Temperature display and
indicator: shows the
temperature in Fahrenheit or
Celsius.
SpO 2 display: shows the
percent saturation of arterial
hemoglobin. For devices with
SpO 2 only.
Navigation Window:
shows menu options, error
messages, or temperature
conversion.
The liquid crystal display (LCD) may indicate any of the following: systolic blood pressure
(mmHg or kPa), diastolic blood pressure (mmHg or kPa), MAP (mmHg or kPa),
temperature (°F or °C), temperature mode, pulse rate, pulse signal level, SpO 2 percent,
department location, date, time, record number, height (in or cm), weight (lb or kg),
respiration rate, pain level, connectivity signal strength, and battery charge level.
Figure 4. Display Window
{
BP
SYS
{
{
{
mmHg
DIA
mmHg
TEMP
Connectivity indicator:
shows the wireless
intranet signal strength.
127 735
98
F
4 WEST
AM
Reading
SpO2 PULSE /min
62
%
01
Patient ID 0123456789
Weight
Pain
Height
Clear
Respiration Send/Next Reading
Pulse Signal Bar Graph: shows
the strength of the pulses detected.
Location identifier: shows
where the device belongs. If no
location is entered, this area
displays the date.
Enter
Clock: shows the current time.
Reading number indicator:
shows what reading the device is
on. Spot LXi retains up to 50
readings in memory.
Battery level indicator:
displays the battery charge level.
Thermometer probe setting
indicators: shows temperature
mode. For devices with SureTemp
Plus thermometer only.
Thermometer probe setting
indicators: shows Monitor
Mode. For devices with SureTemp
Plus thermometer only.
Out-of-range indicator: shows
the patient’s temperature reading
above or below the measurement
range limits. For devices with
SureTemp Plus thermometer only.
Pulse display: shows the pulse
rate.