Spot Vital Signs LXi Service Manual - Frank's Hospital Workshop
Spot Vital Signs LXi Service Manual - Frank's Hospital Workshop
Spot Vital Signs LXi Service Manual - Frank's Hospital Workshop
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Service</strong> <strong>Manual</strong> Disassembly and Repair 53<br />
LCD Inverter Ballast Board Disassembly<br />
LCD Disassembly<br />
This is a small board held in place with two-sided tape. It is located towards the bottom of<br />
the main board. Remove the connector at each end and pull straight up.<br />
1. Remove the main board. At the bottom of this board is a circuit board with a pink<br />
connector at the bottom.<br />
2. Pull the brown tabs of the top connector forward and remove the ribbon cable.<br />
3. Turn the board over, pull back the soft rubber holders, and remove the LCD.<br />
4. Replace with a new LCD.
Change language