LINC Programming Reference Manual - Public Support Login - Unisys

INSERT (INS)
Syntax
Example
INSERT (INS)
The INSERT; command inserts a Global Logic into an Ispec or Report. The INSERT;
command can also be used to insert a Report into another Report. The inserted Report
must not contain logic.
Note: An INSERT; of a Performable Global Logic will not be marked as in error even
if the Performable Global Logic contains errors. Error checking of Performable
Global Logics is only performed when the logic is entered.
Caution
When inserting one Report into another, duplicate Frame numbers may result in
severe truncation and overwriting in those Frames.
In LDA Run Time, Macro Global Logics may not be used with this command.
Removing the insertion of a Report
When you remove the INSERT; command that inserts a Report, the inserted Frames still
appear on the Frame Descriptions screen for the Report, and are listed by the WHFRAMES
Inquiry mode command.
DD DDDBDDD DDDDBDDDDDD4
3 3
CDDD DDD4
3 3
@DDDDDDDDDDDD DDDDDDDDDDDDY
report
References
An existing Report to be inserted into the current Report. If the inserted Report contains
logic, the logic is not inserted. All Report Frame data and displays are validated, and all of
the painted Frames are inserted into the current Report.
"Using Global Logics" in your LINC Generate Operations Guide.
v 1-141