pdf, 12 MiB - Infoscience - EPFL

References
Ackers, P & White, W.R. (1973). Sediment transport: New approach and analysis; Journal of the Hydraulics Division,
99(11), 2041-2060
Ahmad, M. (1953). Experiments on design and behaviour of spur dikes. Proceedings IAHR conference, Minnesota, USA,
145-159
Allen, J.R.L (1970a). A quantitative model of grain size and sedimentary structures in lateral deposits, Geological Journal 7, 129-
146
Allen, J.R.L. (1970b). Studies in fluviatile sedimentations: A comparison of fining upwards cyclotherms, with special reference to
coarse-member composition and interpretation, Journal of sedimentary petrology, 40, 298-323
Ashida, K. & Michiue, M. (1971). An investigation of river bed degradation downstream of a dam. 14th IAHR Congress
Paris, Vol.3
Atsuyuki, D. (1992). Control of local scour in bend channel by roughness on embankment, 5th International Symposium on
River Sedimentation, Karlsruhe, Germany, 61-70
Babovic, V., Keijzer, M., Rodriguez Aguilera, D., Harrington, J. (2001). An evolutionary approach to knowledge induction:
genetic programming in hydraulic engineering. Proceedings of the World Water & Environmental Resources Congress,
ASCE, May 21-24, 2001, Orlando, Fl. USA.
Bagnold, R.A. (1954). Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shear, Proceedings
of the Royal Society of London, A.225, 49-63
Bagnold, R.A. (1956). The flow of cohesionless grains in fluids, Proceedings of the Royal Society of London A.249, 235-297
Bagnold, R.A (1966). An approach to the sediment transport problem from general physics; U.S. Geological Survey Professional
Paper 422-I, 37 pp.
Bagnold, R-A. (1973). The nature of saltation and of ‘bed-load’ transport in water, Proceedings of the Royal Society of London,
A.340, 473-504
Bagnold, R.A. (1974). Fluid forces on a body in shear flow; experimental use of ‘stationary flow’, Proceedings of the Royal Society
of London, A.340, 147-171
Bathurst, J.C., Thorne C.R. & Hey, R.D. (1979). Secondary flow and shear stress at river bends, Journal of the Hydraulics
Division, ASCE 105(10), 1277-1295, October 1979
Bazilevich, V.-A. (1982). Calculation of a local scour depression near a concave bank of a gravel-pebble channel, Gidrotechniceskoe
Stroitelstvo 10, 19-22, October 1982, Translated 1983 by Plenum Publishing Corp.
Billi, P., Hey, R.D., Thorne, C.R. & Tacconi, P. (1992). Dynamics of gravel bed rivers, John Wiley and Sons, New York,
673 pp.
Bishop, A.A, Simons, D.B. & Richardson, E.V. (1965). Total bed material transport. Proceedings ASCE, Journal opf
the Hydraulics Division 91(2), 175-191
Blanckaert, K. & Graf, W.H. (2001). Mean flow and turbulence in open-channel bend. Journal of Hydraulic Engineering,
ASCE 127(10), 835-847
Bluck, B.J. (1971). Sedimentation in the meandering river Endrick, Scottish Journal of Geology, 7(2) 93-138
Breusers, H.N.C. & Raudkivi, A.J. (1991). Scouring, IAHR Hydraulic Structures Design Manual 2, A.A. Balkema,
Rotterdam, Brookfield, The Netherlands, 142 pp.
Bridge, J.S. (1976). Bed topography and grain size in open channel bends, Sedimentology, Int. Association of Sedimentologists,
23, 407-414
Brown, C.B. (1950). Sediment transportation in Engineering Hydraulics. H. Rouse, Editor, Wiley & Sons, New York
Chepil, W.S. (1958). The use of evenly spaced hemispheres to evaluate aerodynamic forces on a soil surface, Transactions of the
American Geophysical Union, Vol. 39, 397-403, June, 1958
Childs, S.J. (2001). Incipient motion criteria for a rigid sediment grain on a rigid surface, Journal of Engineering Mechanics,
ASCE, 127(5), 524-529, May 2001
Choi, K-S. (2000). Drag reduction research at the University of Nottingham, European Research Community on Flow, Turbulence
and Combustion (ERCOFTAC) Bulletin 22, 15-21
Costet, J & Sanglerat, G. (1981). Cours pratique de mécanique des sols, Tomme 1: Plasticité et calcul des tassements, 3rd Edition,
Dunod, Paris (1st & 2nd Edition: 1969, 1975)
Crickmore, M.J. (1967). Measurement of sand transport in rivers with special reference to tracer methods; Sedimentology, 8, 175-
228
Crickmore, M.J. (1970). Effects of flume width on bed-form characteristics; Journal of the Hydraulics Division, 96(2), 473-
496, Proceeding Paper 7077, February 1970
de Vriend, H.J. (1976). A mathematical model of steady flow in curved shallow channels. Journal of Hydraulic Research, IAHR,
15(1), 37-54
page 205