Evolution Technical Manual - Jemphrey

More documents

Recommendations

Info

Technical Manual MAIN CONTROLLER BOARD N.B. Pressure Boiler and Solid State Relay 2 fitted to Evolution B2C machines only. 9 8 7 6 5 4 3 2 1 2.0 kW PRESSURE BOILER WHITE BLACK BROWN 2.4 kW HEATER TANK BLUE (1) 240V WHITE N BLACK I/O BOARD THERMAL CUT OUT (MANUAL RESET) BROWN/RED 2 BROWN THERMAL CUT OUT (MANUAL RESET) SOLID STATE RELAY 2 BROWN/GREY 2 SOLID STATE RELAY 1 YELLOW/GREEN ORANGE/GREEN BLUE (1) 6 5 4 3 2 1 J6 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 J10 124
Technical Manual Section 12 - Spare Parts The following section details the spare parts that are available for the Evolution. Use of these genuine components when servicing or repairing the machine will significantly increase the working life of the machine. For all spare parts sales and enquiries: Telephone: 01249 667321 Fax: 01249 461508 Email: spares@cranems.co.uk 125
Page 1 and 2:
Technical Manual Covers Instant, Fr
Page 3 and 4:
Technical Manual Contents Page No.
Page 5 and 6:
Technical Manual Section 1 - Machin
Page 7 and 8:
Technical Manual 1.4 Internal Featu
Page 9 and 10:
Section 2 - Installation Procedure
Page 11 and 12:
Technical Manual 3. Cup Turret. Rel
Page 13 and 14:
Technical Manual To aid filling, ha
Page 15 and 16:
Technical Manual to the drinks disp
Page 17 and 18:
Technical Manual 3.2 Menu Display T
Page 19 and 20:
Technical Manual 9. Using the ▲ (
Page 21 and 22:
Technical Manual Discount-£ Displa
Page 23 and 24:
Technical Manual Once the engineer
Page 25 and 26:
4.3 Test Menu Technical Manual This
Page 27 and 28:
Technical Manual N.B. A cold drink
Page 29 and 30:
Technical Manual blocking the SureV
Page 31 and 32:
Technical Manual 2. To test the Mai
Page 33 and 34:
Technical Manual 2. To enter a disc
Page 35 and 36:
Technical Manual The default F/B Co
Page 37 and 38:
Technical Manual 4. Enter the disab
Page 39 and 40:
Technical Manual 5. Once the softwa
Page 41 and 42:
Technical Manual 1. To set a new Mi
Page 43 and 44:
Technical Manual Important: Once th
Page 45 and 46:
Technical Manual The keys are confi
Page 47 and 48:
2. Press the ↵ (Edit) key to save
Page 49 and 50:
6. Configure Change Without Purchas
Page 51 and 52:
Technical Manual This option specif
Page 53 and 54:
allow all fields to be available fo
Page 55 and 56:
Technical Manual ensuring even grea
Page 57 and 58:
Technical Manual entry codes for th
Page 59 and 60:
Technical Manual 9. Press the ▼ (
Page 61 and 62:
Technical Manual 4. Press the ▼ (
Page 63 and 64:
Technical Manual 3. Press the ↵ (
Page 65 and 66:
Technical Manual Caution: Ensure th
Page 67 and 68:
Technical Manual is dispensed from
Page 69 and 70:
Section 6 - The Vend Cycle 6.1 Stan
Page 71 and 72:
Technical Manual 3. If milk and/or
Page 73 and 74:
the customer has placed their own c
Page 75 and 76: Technical Manual 7. Replace the mai
Page 77 and 78: Technical Manual 7.4 Ingredient Dis
Page 79 and 80: all the turret extrusions have been
Page 81 and 82: Technical Manual 7.11 Power Supply
Page 83 and 84: Section 8 - Espresso (B2C) System E
Page 85 and 86: Technical Manual 1. Water Inlet Val
Page 87 and 88: Section 9 - Dispense Pipe Lengths 9
Page 89 and 90: Technical Manual 9.3 Single Freshbr
Page 91 and 92: Technical Manual 9.5 Freshbrew Mach
Page 93 and 94: Technical Manual 9.7 Espresso Machi
Page 95 and 96: Technical Manual Error Diagnostics
Page 97 and 98: Technical Manual 3. Once all of the
Page 99 and 100: Technical Manual inlet pipes to the
Page 101 and 102: Technical Manual cup ejection. 3. I
Page 103 and 104: Technical Manual 9. Refit the RH bo
Page 105 and 106: Technical Manual 5. Holding the uni
Page 107 and 108: Technical Manual 13. Re-assemble th
Page 109 and 110: Technical Manual Section 11 - Elect
Page 111 and 112: Technical Manual 11.3 Control Board
Page 113 and 114: 11.5 Control Board Connections - 2
Page 115 and 116: 11.7 Input Circuit - Instant Machin
Page 117 and 118: Technical Manual 11.9 Input/Output
Page 119 and 120: Technical Manual 11.11 Output Circu
Page 121 and 122: 11.13 Input Circuit - B2C Machines
Page 123 and 124: L N L N 3 4 Technical Manual 11.15
Page 125: Technical Manual 11.17 Heater Circu
Page 129 and 130: Technical Manual Exterior View Ref
Page 131 and 132: Technical Manual Door Assembly Ref
Page 133 and 134: Technical Manual Interior View - In
Page 135 and 136: Technical Manual Interior View - In
Page 137 and 138: Technical Manual Interior View - Fr
Page 139 and 140: Interior View - Freshbrew (Paperles
Page 141 and 142: Technical Manual Interior View - Fr
Page 143 and 144: Interior View - Freshbrew (King Bre
Page 145 and 146: Technical Manual Interior View - B2
Page 147 and 148: Interior View - B2C (Covers Removed
Page 149 and 150: Keypad - Numeric Ref No. Part No. I
Page 151 and 152: Keypad - 18 Button Ref No. Part No.
Page 153 and 154: Technical Manual Cup Drop Unit Asse
Page 155 and 156: Technical Manual Canister Assembly
Page 161 and 162: Dispense Head Assembly Ref No. Part
Page 163 and 164: Technical Manual Heater Tank Assemb
Page 165 and 166: Technical Manual Mixing System Ref
Page 167 and 168: Technical Manual Power Supply Assem
Page 169 and 170: Technical Manual Fuse Plate Assembl
Page 171 and 172: Technical Manual Brewer Motor Assem
Page 173 and 174: Technical Manual Brewer Assembly -
Page 175 and 176: Technical Manual Brewer Assembly -
Page 177 and 178:
Technical Manual Brewer Assembly -
Page 179 and 180:
Brewer Assembly - Paperless Type (C
Page 181 and 182:
Technical Manual CoEx® Module Asse
Page 183 and 184:
Technical Manual CoEx® Brewer/Moto
Page 185 and 186:
Technical Manual CoEx® Module Asse
Page 187 and 188:
Technical Manual Teapot Assembly (B
Page 189 and 190:
Technical Manual SureVend Sensors A
Page 191 and 192:
Technical Manual Extract System Ref
Page 193 and 194:
Technical Manual Waste Bucket Assem
Page 195 and 196:
Technical Manual Water Filter Assem
Page 197 and 198:
Technical Manual Water Filter Assem
Page 199 and 200:
Water Filter Assembly - Everpure Re
Page 201:
Pipsmore Park, Bumpers Farm Industr
show all

Evolution Technical Manual - Jemphrey

Create successful ePaper yourself

Delete template?

Save as template?