Evolution Technical Manual - Jemphrey

Technical Manual
To configure SureVend, proceed as follows:
1. From the Product Configuration menu highlight
SureVend and press the ↵ (Edit) key. By default
SureVend is factory set to On as indicated by
the status line at the bottom of the screen.
SureVend
SureVend
On
2. To disable SureVend, press the ↵ (Edit) key to
enter the SureVend On/Off screen. Use the ▲
(up) key to select Off (indicated by the filled
radio button).
3. Press the ↵ (Edit) key to confirm the selection and return to the SureVend screen.
Verify that the status line at the bottom of the screen displays Off when SureVend
is highlighted.
4. Pressing the X (Exit) key will move back to the Product Configuration screen and
save the new parameter to the machines memory.
5. Cup Size Selection: This sub menu allows the engineer to quickly and easily
change the cup size dispensed by the machine, either 7oz or 9oz when required.
1. From the Product Configuration menu highlight Cup Size Selection.The screen will
display the current cup size (eg 9oz) as indicated by the status line at the bottom
of the screen.
2. To change the cup size, press the ↵ (Edit) key to
enter the Cup Size Selection screen. Use the ▲
(up) key to select 7oz (indicated by the filled
radio button).
7oz
9oz
Cup Size Selection
3. Press the ↵ (Edit) key. The screen will change
and prompt the engineer to confirm the
selection. Press the ↵ (Edit) key to continue.
Confirm Selection
Are you sure you want
to change cup size
timer values?
CANCEL - EXIT
OK - EDIT
4. The LCD will display the screen as shown. In the
background the software is updating all preloaded
parameters relating to serving a 7oz
drink.
Confirm Selection
Please wait -
Updating cup size
timer values
36