Grundfos E-pumps

Grundfos E-pumps
12
Remote control, R100
The Grundfos R100 remote control is designed for
wireless IR communication with Grundfos products.
The R100 is supplied with a case, batteries, a
detachable pocket clip and operating instructions.
The functions available depend on each individual
product. See installation and operating instructions for
the product.
Display
The display is a 1.8 in. x 1.2 in. (46 x 30 mm) graphic
(dot matrix) LCD display with 100 x 65 dots.
The graphics appear in blue color on a grey
background. The display has yellow back light to
facilitate reading.
A countersunk tempered-glass plate protects the
display against knocks and scratches.
Product number
Accessories
Fig. 93 R100 remote control
Construction
The R100 is a robust mechanical construction made of
impact-resistant polycarbonate (PC). The R100 has silicone
rubber buttons.
The R100 is to be regarded as an ordinary service and
measuring tool, and is therefore designed to withstand
wear and stress from everyday use.
An infrared light (IR) transmitter/receiver is located
within the unit.
The design of the unit and the position of the buttons
enable operation of the R100 with one hand only.
The R100 is completely maintenance-free. It can be
cleaned with a damp cloth without cleaning material.
TM00 4498 2802
Product
Product number
R100 96615297
Potentiometer
Potentiometer for setpoint setting and start/stop of the
pump.
Product number
Product
External potentiometer with cabinet for wall
mounting
Fig. 94 SPP 1 potentiometer
Product number
415929
TM05 1512 2811
83