Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTALLATION<br />
25 FITTING T<strong>HE</strong> OPTIONAL ROOF FLUE KIT (Flat or Pitched)<br />
Note.<br />
A flat or pitched roof flashing plate (not supplied) is required before<br />
proceeding with the installation of this kit.<br />
This kit is suitable for both flat and pitched roof terminations, using a<br />
<strong>co</strong>ncentric flue to run vertically from the top of the boiler and terminating<br />
above roof level.<br />
WEAT<strong>HE</strong>R PROOFING<br />
Where the flue passes through the roof line an adequate seal must<br />
be made. This is achieved by using either:<br />
- Flat roof weather <strong>co</strong>llar<br />
or<br />
- Universal weather <strong>co</strong>llar.<br />
ACCESSORIES<br />
Flue Duct Extension Kits are available for<br />
flue lengths extending beyond 1m. These<br />
packs <strong>co</strong>ntain 1m extension ducts and may<br />
be cut to the desired length.<br />
If the offset vertical option is used an elbow<br />
Kit is required. For a full accessories list<br />
refer to page 6, Optional Extras and Frames<br />
26 and 28, Flue Arrangement.<br />
nm8736<br />
26 ROOF FLUE KIT CONTENTS / OPTIONS<br />
Flue Terminal<br />
UIN 203132<br />
Flue<br />
duct<br />
support<br />
Flue Seal Collar - Flat Roof<br />
UIN 152259<br />
Flue Seal Collar - Tile Roof<br />
UIN 152258<br />
Vertical <strong>co</strong>nnector<br />
UIN 204180<br />
45 o elbow<br />
UIN 203131<br />
Roof Flue Extension Duct<br />
UIN 203129<br />
90 o elbow<br />
UIN 2031<strong>30</strong><br />
esp9177<br />
FLUE OUTLET<br />
<strong>Esprit</strong> - Installation and Servicing<br />
25
Change language