Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Ideal Esprit HE Combi Boilers 24,30,35 User Guide - BHL.co.uk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SERVICING<br />
46 T<strong>HE</strong> CONTROL BOX IN T<strong>HE</strong> SERVICING POSITION<br />
1. Pull the panel forward at the top to disengage the<br />
two clips.<br />
2. Carefully swing the <strong>co</strong>ntrol down into its<br />
servicing position.<br />
esp8854<br />
SERVICING<br />
47 FAN AND VENTURI ASSEMBLY REMOVAL AND CLEANING<br />
1. Dis<strong>co</strong>nnect the electrical leads from the<br />
fan.<br />
2. Undo the gas pipe union <strong>co</strong>nnection to the<br />
injector housing.<br />
3. Undo the screw on the fan mounting<br />
bracket.<br />
3<br />
1<br />
4<br />
2<br />
4. Lift off fan and venturi assembly.<br />
5. Inspect the injector for blockage or<br />
damage.<br />
Ecl 6073<br />
48 BURNER REMOVAL AND CLEANING<br />
1<br />
1. Remove the 6 screws securing the burner (the 3 screws at the<br />
rear are extended to ease access).<br />
2. Lift off the burner from the <strong>co</strong>mbustion chamber.<br />
IMPORTANT<br />
The burner head is a ceramic plaque <strong>co</strong>nstruction. Care must<br />
be taken to ensure that the burner is not placed down upon its<br />
face as this may cause damage to the ceramic.<br />
2<br />
4<br />
3. Brush off any deposits that may be on the ceramic with a SOFT<br />
brush.<br />
4. Inspect the sealing gasket around the burner and <strong>co</strong>mbustion<br />
chamber insulation for any signs of damage. Replace as<br />
necessary.<br />
Ionisation<br />
Probes<br />
Note.<br />
Take care not to disturb the ionisation probes at the front and rear<br />
of the <strong>co</strong>mbustion chamber.<br />
nm7400<br />
40<br />
<strong>Esprit</strong> - Installation and Servicing
Change language