Thermonicolet Omnic Software User's Guide 6.1 (PDF) - Charles E ...

6. If you disabled or hid the Save Configuration As command and want to
save your changes, click the Save button.
(You will not be able to save your changes after closing the Edit Menu dialog
box in this case.) The Save Configuration dialog box appears. This is the
same dialog box that appears when you choose Save Configuration As from
the File menu. See “How to save a configuration” in the “File” chapter for
instructions on using the dialog box; start with step 2 of that procedure.
7. When you are finished customizing the menus, choose OK.
To save your menu changes, use Save Configuration As in the File menu (if it is
available). You will be prompted to save your changes when you exit OMNIC.
Customizing a toolbar
Edit Toolbar in the Edit menu lets you and other users create custom toolbars
containing buttons for quickly initiating commands, macros or external programs.
You can create a button for any command in any OMNIC menu.
You can remove the menu bar and Experiment drop-down list box from the
OMNIC window by turning on the Hide All OMNIC Menus option. This lets you
create a simplified configuration in which users must use toolbar buttons instead
of menu commands to perform operations.
Important
Note
If you turn on Hide All OMNIC Menus, do not turn on Set As Default Configuration
when you save the configuration with the Save button. ▲
If you turn on Hide All OMNIC Menus, the Add To A New Window option will not
be available in the window selection box in task windows. ▲
After you create a toolbar, you can save it as part of your own software
configuration in a file that can be opened later. (The setting of Hide All OMNIC
Menus is also saved in the configuration.) This lets you quickly reset OMNIC to
your preferences after others have used the software. You can assign a password
to protect the file so that only you can make changes to the configuration. See
“Saving a configuration” and “Opening a configuration” in the “File” chapter for
details on saving and opening a configuration file.
Customize a toolbar
1. Choose Edit Toolbar from the Edit menu.
The Edit Toolbar dialog box appears.
106 Thermo Nicolet