Thermonicolet Omnic Software User's Guide 6.1 (PDF) - Charles E ...

If you want to print the information about the current library spectrum, turn
on Library Spectra Information.
If you want each item printed on a separate page, turn on Print Items On
Separate Pages.
To set up the printer, choose Printer Setup. The Print Setup dialog box
appears. Select the printer from the list box. You can also specify portrait or
landscape page orientation.
Note
If you change the orientation, the Orientation option in the Print options (available
through Options in the Edit menu) will be reset to the new orientation. The page
orientation setting in Windows Control Panel or in the printer setup dialog box for
other applications is not affected by the setting you make here. ▲
If you want to set the printer parameters, choose Options in the Print Setup
dialog box. If you don’t want to set the parameters, choose OK. If you choose
Options, a dialog box shows the current settings of the printer parameters.
This dialog box varies in appearance depending on your printer. See the
documentation that came with your printer for information on setting the
printer parameters. After you set the parameters, choose OK to close the
dialog box, and then choose OK to close the Print Setup dialog box.
When you are ready to start printing, choose OK.
4. When you are finished using Library Manager, choose Close.
Viewing a library
in EZ OMNIC
If you have EZ OMNIC, you can use View Library in the Analyze menu to view
the contents of a library, see information about a library or delete a spectrum from
a user library.
View a library in EZ OMNIC
1. Choose View Library from the Analyze menu.
The Select Library dialog box lists the libraries available on the hard disk.
The libraries are listed by their
library names, not by their filenames.
288 Thermo Nicolet