Thermonicolet Omnic Software User's Guide 6.1 (PDF) - Charles E ...

7. Click the name of the library.
You can only add the spectra to a library that you created; you cannot add
spectra to a commercial library.
8. Choose Add To Library.
The Add To Library dialog box shows the name of the library and the library
index number that will be assigned to the spectrum.
9. In the text boxes below Enter Field Information type the desired
information for each field.
The first field already contains the title of the spectrum. The kinds of
information to be entered in the other text boxes depend on what custom
information field names you specified when you created the library. The
contents of these fields will be searched when you find spectra by searching
for text using the Search For Text tab.
If you are adding spectra to a search library or scrapbook library, go to step 11.
10. If you are adding the spectra to a QC library, the dialog box lets you specify
whether to add the spectrum to an existing compound type or to a new type.
To add the first spectrum to an existing type, select Add To Current
Compound Type and then select one of the listed types. To add the spectrum
to a new type, select Enter A Compound Type and then type a name for the
new type in the text box.
11. Choose OK to add the spectrum or OK To All to add all the selected
spectra using the specifications you have made for the first spectrum.
• If you are adding just one spectrum and chose OK, or if you are adding
more than one spectrum and chose OK To All, the procedure is finished
(unless a spectrum fails a specified check; this is explained below).
OMNIC User’s Guide 277