Thermonicolet Omnic Software User's Guide 6.1 (PDF) - Charles E ...

Note
The options you set using Options are different from the experiment parameters
you set using Experiment Setup in the Collect menu. The options are normally set
according to how you or other users prefer to use the software. The experiment
parameters, on the other hand, are normally set according to the type of data being
collected or analyzed. ▲
The Options dialog box displays any one of seven sets of options: File, View,
Print, Collect, Process, Window and Security. Each set is contained on a tab
whose name is always visible at the top of the dialog box. To display a set of
options, click the appropriate tab. The options are brought to the front.
Note
The Security options are available only if you have the DS option and Show Security
Options In This Configuration is turned on in the Security options. ▲
After you have set the options, you can save them in a configuration file by using
Save Configuration As in the File menu. See “Saving a configuration” in the
“File” chapter for details.
To use the options you have saved in a configuration, use Open Configuration in the
File menu. When you open the file, OMNIC is set up according to your preferences.
See “Opening a configuration” in the “File” chapter for more information.
To change the settings in your options, open your configuration and then make the
desired changes. To save the settings, use Save Configuration As in the File menu.
The following sections describe the six sets of options.
File options
The File options appear when you click the File tab.
The following table shows what you can specify with the File options.
74 Thermo Nicolet