Thermonicolet Omnic Software User's Guide 6.1 (PDF) - Charles E ...

If you choose Cancel, the data collection procedure will end.
• If the following message appears, choose Yes if you want to collect a new
background and then follow the instructions that appear on the screen.
If you choose No, sample data collection continues. The current
background will be used to ratio the sample spectrum (if necessary to
obtain the specified final format).
If you choose Cancel, sample data collection ends. You can then collect a
new background using Collect Background in the Collect menu or
perform other tasks. To specify a different background age, use
Experiment Setup in the Collect menu.
• If the following message appears, choose OK to collect a new
background and then follow the instructions that appear on the screen.
• If data collection is finished and the Collect Sample window is displayed,
you can move the spectrum to a spectral window so that you can use it in
operations. To do this, select the desired option from the window selection
box at the top of the Collect Sample window and then choose Add.
Note
You can select an option from the window selection box while data are being
collected. You will be asked if you want the collected spectrum placed in the
window you specified. ▲
If you don’t want to move the spectrum to a spectral window, close the
Collect Sample window.
• If the following message appears, choose Yes to add the spectrum to the
indicated window; choose No to end the procedure without saving the
spectrum; or choose Cancel to return to the Collect Sample window. To
view information about collection problems, choose View Collect Status.
OMNIC User’s Guide 153