csmstr - Omega Engineering

ACTION DESCRIPTIONS
CRIMSON USER MANUAL - MODULAR CONTROLLER
• Tune Name selects the tune to be played.
Customized tunes may be played using the PlayRTTTL() function.
THE USER DEFINED ACTION
This action is used to do anything else you desire! The options are shown below…
• The On Pressed property is used to define the action to be performed when the
key is pressed. This action may invoke any of the functions from the Function
Reference or the data modification operators described in the Writing Actions
section, or it may run a program.
• The On Auto-Repeat property is used to define the action to be performed when
the key is pressed and then held down. The action occurs both on the initial
depression and on subsequent auto-repeats, so there is no need to define both this
property and On Pressed. This action may invoke any of the functions from the
Function Reference or the data modification operators described in the Writing
Actions section, or it may run a program.
• The On Released property is used to define the action to be performed when the
key is released. This action may invoke any of the functions from the Function
Reference or the data modification operators described in the Writing Actions
section, or it may run a program.
In the example above, a user defined action is used to implement a momentary pushbutton.
BLOCK DEFAULT ACTION
This action does not actually do anything, but can be used as a place-holder to prevent further
processing. As an example, suppose you have configured F1 to perform a global action, but
want to prevent this action from being invoked on a particular page. By configuring F1 on
that page as Block Default Action, the global action will not occur.
PAGE 154
http://www.redlion.net/controller