csmstr - Omega Engineering

CONFIGURING DATA LOGGING
NOTES FOR EDICT USERS
• -num can be used to override the phone number for the connection.
EXAMPLE USAGE
As an example, the following command line…
websync –poll 10 –path C:\Logs 192.9.200.52
…will read the log files for all data logs on the Master with the IP address of 192.9.200.52,
and will store these logs under subdirectories of the C:\Logs directory. WebSync will
continue to execute, and will repeat the polling process every ten minutes. The polling
interval must obviously be set such that it is much less than the sampling rate times the
number of samples in a file times the number of log files to be retained. If this constraint is
met, the directory on the PC will accumulate copies of all the log files from the Master.
NOTES FOR EDICT USERS
Users of Red Lion’s Edict-97 software should note…
• Logs within Crimson record the time and date of each sample, and do not need to
store the “empty” values used by Edict to mark power-down periods. When a
Master module is powered-down, this will show simply as a gap in the log files.
REVISION 6 PAGE 243