csmstr - Omega Engineering

ACTION DESCRIPTIONS
CRIMSON USER MANUAL - MODULAR CONTROLLER
THE PUSH BUTTON ACTION
This action is used to emulate a pushbutton. The options are shown below…
• The Button Type property is used to define the primitive’s behavior.
BUTTON TYPE
Toggle
Momentary
Turn On
Turn Off
THE BUTTON WILL…
Change the data state when the primitive is pressed.
Set the data to 1 when the primitive is pressed.
Set the data to 0 when the primitive is released.
Set the data to 1 when the primitive is pressed.
Set the data to 0 when the primitive is pressed.
• The Button Data property is used to define the data to be changed.
In the example above, the primitive will toggle the value of the Output tag.
PAGE 168
http://www.redlion.net/controller