csmstr - Omega Engineering

FUNCTION REFERENCE
SETNETCONFIG(PORT, ADDR, MASK, GATE)
SETNETCONFIG(PORT, ADDR, MASK, GATE)
ARGUMENT TYPE DESCRIPTION
port int The index of the Ethernet port. Must be zero.
addr int The required IP address for the port.
mask int The required netmask for the port.
gate int The required default gateway for the port.
DESCRIPTION
Overrides the database settings for the Ethernet port. The various IP parameters are 32-bit
integers that can optionally be formed from strings using the TextToAddr() function. Note
that setting all three of the IP values to zero will reset the port’s settings to the database
defaults. Note also that the unit must be power-cycled before the new values will take effect.
FUNCTION TYPE
This function is active.
RETURN TYPE
This function does not return a value.
EXAMPLE
SetNetConfig(0,0,0,0)
REVISION 6 PAGE 407