GA-EX58-UD3R - Hardware
GA-EX58-UD3R - Hardware
GA-EX58-UD3R - Hardware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
******* Advanced Clock Control *******<br />
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software<br />
Advanced Clock Control<br />
>>>>> Sandard Clock Control<br />
Base Clock(BCLK) Control<br />
[Disabled]<br />
x BCLK Frequency (Mhz) 133<br />
PCI Express Frequency (Mhz)<br />
[Auto]<br />
C.I.A. 2<br />
[Disabled]<br />
>>>>> Advanced Clock Control<br />
CPU Clock Drive<br />
[800mV]<br />
PCI Express Clock Drive<br />
[900mV]<br />
CPU Clock Skew<br />
[0ps]<br />
IOH Clock Skew<br />
[0ps]<br />
Item Help<br />
Menu Level<br />
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help<br />
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults<br />
>>>>> Standard Clock Control<br />
Base Clock(BCLK) Control<br />
Enables or disables the control of CPU base clock. Enabled will allow the BCLK Frequency (Mhz)<br />
item below to be configurable. Note: If your system fails to boot after overclocking, please wait for<br />
20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to<br />
default values. (Default: Disabled)<br />
BCLK Frequency (Mhz)<br />
Allows you to manually set the CPU base clock. The adjustable range is from 100 MHz to 1200 MHz.<br />
This item is configurable only if the Base Clock(BCLK) Control option is enabled.<br />
Important It is highly recommended that the CPU frequency be set in accordance with the CPU<br />
specifications.<br />
PCI Express Frequency (Mhz)<br />
Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to<br />
150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto)<br />
C.I.A.2<br />
CPU Intelligent Accelerator 2 (C.I.A.2) is designed to automatically adjust CPU computing power<br />
to maximize system performance. C.I.A.2 allows your system bus to be changed dynamically<br />
based on CPU loading through the use of 5 preset states.<br />
Note: System stability varies, depending on your system hardware components.<br />
Disabled Disables the use of C.I.A.2. (Default)<br />
Cruise Increases CPU frequency by 5% or 7% depending on CPU loading.<br />
Sports Increases CPU frequency by 7% or 9% depending on CPU loading.<br />
Racing Increases CPU frequency by 9% or 11% depending on CPU loading.<br />
Turbo Increases CPU frequency by 15% or 17% depending on CPU loading.<br />
Full Thrust Increases CPU frequency by 17% or 19% depending on CPU loading.<br />
Warning: Before using C.I.A.2, please first verify the overclocking capability of your CPU.<br />
As stability is highly dependent on system components, when system instability occurs after<br />
overclocking, lower the overclocking ratio.<br />
<strong>GA</strong>-<strong>EX58</strong>-<strong>UD3R</strong> Motherboard - 40 -