GA-EX58-UD3R - Hardware
GA-EX58-UD3R - Hardware
GA-EX58-UD3R - Hardware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5-1-4 Installing the SATA RAID/AHCI Driver and Operating System<br />
With the SATA RAID/AHCI driver diskette and correct BIOS settings, you are ready to install Windows<br />
Vista/XP onto your hard drive(s). The followings are examples of Windows XP and Vista installation.<br />
A. Installing Windows XP<br />
Step 1:<br />
Restart your system to boot from the Windows XP setup disk and press as soon as you see the<br />
message "Press F6 if you need to install a 3rd party SCSI or RAID driver" (Figure 1). A screen will then<br />
appear asking you to specify additional device.<br />
Windows Setup<br />
Press F6 if you need to install a third party SCSI or RAID driver.<br />
Figure 1<br />
Step 2:<br />
For Intel ICH10R SATA controllers:<br />
Insert the floppy disk containing the SATA RAID/AHCI driver and press . Then a controller menu<br />
similar to Figure 2 below will appear. Select Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller<br />
and press .<br />
Windows Setup<br />
You have chosen to configure a SCSI Adapter for use with Windows,<br />
using a device support disk provided by an adapter manufacturer.<br />
Select the SCSI Adapter you want from the following list, or press ESC<br />
to return to the previous screen.<br />
Intel(R) ICH7R/DH SATA RAID Controller<br />
Intel(R) ICH7MDH SATA RAID Controller<br />
Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller<br />
Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller<br />
ENTER=Select F3=Exit<br />
Figure 2<br />
<strong>GA</strong>-<strong>EX58</strong>-<strong>UD3R</strong> Motherboard - 90 -
Change language