GA-EX58-UD3R - Hardware

More documents

Recommendations

Info

7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main screen to save your settings before exiting the RAID BIOS utility, then press (Figure 10). GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving [ RAID Disk Drive List ] Model Name Capacity Type/Status HDD0: ST3120026AS 120 GB RAID Inside HDD1: ST3120026AS 120 GB RAID Inside Save to Disk & Exit (Y/N)?Y Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [TAB]-Switch Window []-Select ITEM [ENTER]-Action [ESC]-Exit Figure 10 Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/AHCI driver and operating system. Delete the RAID Array: To delete the array, select Delete RAID Disk Drive in the main menu and press . The selection bar will move to the RAID Disk Drive List block. Press the space bar on the array to be deleted; a small triangle will appear to mark the selected array. Press . When prompted to confirm your selection (Figure 11), press to confirm or to cancel. GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving Model Name Capacity Type/Status HDD0: ST3120026AS 120 GB RAID Inside HDD1: ST3120026AS 120 GB RAID Inside [ RAID Disk Drive List ] ALL DATA ON THE RAID WILL LOST!! ARE YOU SURE TO DELETE (Y/N)? N Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 []-Select RAID [SPACE]-Mark Delete [DEL]-Confirm [ESC]-Abort Figure 11 GA-EX58-UD3R Motherboard - 88 -
5-1-3 Making a SATA RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode) To successfully install operating system onto SATA hard drive(s) that is/are configured to RAID/AHCI mode, you need to install the SATA controller driver during the OS installation. Without the driver, the hard drive may not be recognized during the Windows setup process. First of all, copy the driver for the SATA controller from the motherboard driver disk to a floppy disk. For installing Windows Vista, you also can copy the SATA controller driver from the motherboard driver disk to a USB flash drive. See the instructions below about how to copy the driver in MS-DOS mode (Note) . Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk. Step 1: Insert the prepared startup disk and motherboard driver disk in your system. Boot from the startup disk. Once at the A:\> prompt, change to your optical drive (example: D:\>). At the D:\> prompt, type the following two commands. Press after each command (Figure 1): cd bootdrv menu Step 2: When the controller menu (Figure 2) appears, remove the startup disk and insert the blank formatted disk. Select the controller driver by pressing the corresponding letter from the menu. For example, from the menu in Figure 2: • For Intel ICH10R SATA controllers, select 1) Intel Matrix Storage driver for 32bit system for Windows 32-bit operating system or 2) Intel Matrix Storage driver for 64bit system for Windows 64-bit. • For GIGABYTE SATA2 SATA controller, select 3) GIGABYTE GSATA driver for 32bit system for Windows 32-bit operating system or 4) GIGABYTE GSATA driver for 64bit system 64-bit. Your system will then automatically zip and transfer this driver file to the floppy disk. Press to exit when finished. Figure 1 Figure 2 (Note) For users without a startup disk: Use an alternative system and insert the motherboard driver disk. From your optical drive folder, double click the Menu.exe file in the BootDrv folder (Figure 3). A command prompt window will open similar to that in Figure 2. Figure 3 - 89 - Appendix
Page 1 and 2:
GA-EX58-UD3R LGA1366 socket motherb
Page 3 and 4:
Copyright © 2008 GIGA-BYTE TECHNOL
Page 5 and 6:
Chapter 3 Drivers Installation ....
Page 7 and 8:
GA-EX58-UD3R Motherboard Layout KB_
Page 9 and 10:
Chapter 1 Hardware Installation 1-1
Page 11 and 12:
Internal Connectors • 1 x 24-pin
Page 13 and 14:
1-3 Installing the CPU and CPU Cool
Page 15 and 16:
1-3-2 Installing the CPU Cooler Fol
Page 17 and 18:
1-4-2 Installing a Memory Before in
Page 19 and 20:
1-6 Back Panel Connectors PS/2 Keyb
Page 21 and 22:
1-7 Internal Connectors 1 3 23 5 2
Page 23 and 24:
3/4/5) CPU_FAN / SYS_FAN1 / SYS_FAN
Page 25 and 26:
9) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Co
Page 27 and 28:
13) F_PANEL (Front Panel Header) Co
Page 29 and 30:
16) SPDIF_I (S/PDIF In Header, Red)
Page 31 and 32:
20) COMA (Serial Port Header, White
Page 33 and 34:
Chapter 2 BIOS Setup BIOS (Basic In
Page 35 and 36:
2-2 The Main Menu Once you enter th
Page 37 and 38: 2-3 MB Intelligent Tweaker(M.I.T.)
Page 39 and 40: CPU Thermal Monitor (Note) Enables
Page 41 and 42: Advanced Clock Control CPU Clock Dr
Page 43 and 44: Channel A/B/C Advanced Timing Contr
Page 45 and 46: ******* Advanced Voltage Control **
Page 47 and 48: 2-4 Standard CMOS Features CMOS Set
Page 49 and 50: 2-5 Advanced BIOS Features CMOS Set
Page 51 and 52: 2-6 Integrated Peripherals CMOS Set
Page 53 and 54: When LAN Cable Is Functioning Norma
Page 55 and 56: Resume by Alarm Determines whether
Page 57 and 58: Current Voltage(V) Vcore / DDR15V /
Page 59 and 60: 2-11 Set Supervisor/User Password C
Page 61 and 62: Chapter 3 Drivers Installation •
Page 63 and 64: 3-4 Contact Click the URL on this p
Page 65 and 66: Chapter 4 Unique Features 4-1 Xpres
Page 67 and 68: D. Using the Restore Function in Xp
Page 69 and 70: B. Updating the BIOS When updating
Page 71 and 72: 4-2-2 Updating the BIOS with the @B
Page 73 and 74: 4-4 Dynamic Energy Saver Advanced G
Page 75 and 76: 4-5 Q-Share Q-Share is an easy and
Page 77 and 78: Chapter 5 Appendix 5-1 Configuring
Page 79 and 80: C. Configuring a RAID array in RAID
Page 81 and 82: Step 5: Enter the array capacity an
Page 83 and 84: 5-1-2 Configuring GIGABYTE SATA2 SA
Page 85 and 86: Create a RAID Array: In the main sc
Page 87: When finished, the new RAID array w
Page 91 and 92: For GIGABYTE SATA2 SATA controller:
Page 93 and 94: Step 3: When a screen as shown in F
Page 95 and 96: Step 3: When a screen as shown in F
Page 97 and 98: Performing the Rebuild in the Opera
Page 99 and 100: Rebuilding in the operating system
Page 101 and 102: Step 2: Connect an audio device to
Page 103 and 104: B. S/PDIF Out: The S/PDIF out jacks
Page 105 and 106: Step 4: To raise the recording and
Page 107 and 108: 5-3 Troubleshooting 5-3-1 Frequentl
Page 109 and 110: A When the computer is turned on, i
Page 111 and 112: Finally, we suggest that you practi
Page 113 and 114: - 113 - Appendix
Page 119 and 120: Contact Us • GIGA-BYTE TECHNOLOGY
show all

GA-EX58-UD3R - Hardware

Create successful ePaper yourself

Delete template?

Save as template?