GA-EX58-UD3R - Hardware

More documents

Recommendations

Info

No-Execute Memory Protect (Note) Enables or disables Intel Execute Disable Bit function. This function may enhance protection for the computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its supporting software and system. (Default: Enabled) Delay For HDD (Secs) Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The adjustable range is from 0 to 15 seconds. (Default: 0) Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. (Default: Enabled) Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or PCI Express graphics card. PCI Sets the PCI graphics card as the first display. (Default) PEG Sets PCI Express graphics card on the first PCI Express x16 slot (PCIEX16_1) as the first display. PEG2 Sets PCI Express graphics card on the second PCI Express x16 slot (PCIEX16_2) as the first display. PEG3 Sets PCI Express graphics card on the PCI Express x4 slot (PCIEX4_1) as the first display. (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. GA-EX58-UD3R Motherboard - 50 -
2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Integrated Peripherals SATA RAID/AHCI Mode [Disabled] Item Help SATA Port0-3 Native Mode [Disabled] Menu Level USB 1.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Function [Disabled] USB Mouse Function [Disabled] USB Storage Function [Enabled] Azalia Codec [Auto] Onboard H/W 1394 [Enabled] Onboard H/W LAN1 [Enabled] Onboard Green LAN H/W LAN2 [Enabled] [Disabled] Green SMART LAN LAN [Disabled] [Press Enter] SMART Onboard LAN1 Boot ROM [Press [Disabled] Enter] SMART Onboard LAN2 SATA/IDE Device [Press [Enabled] Enter] Onboard LAN1 SATA/IDE Boot Ctrl ROM Mode [Disabled] [IDE] Onboard LAN2 Serial Port Boot 1 ROM [Disabled] [3F8/IRQ4] Onboard SATA/IDE Device [Enabled] Onboard SATA/IDE Ctrl Mode [IDE] Smart Backup [Press Enter] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults SATA RAID/AHCI Mode (Intel ICH10R Southbridge) Enables or disables RAID for the SATA controllers integrated in the Intel ICH10R Southbridge or configures the SATA controllers to AHCI mode. Disabled Disables RAID for the SATA controllers and configures the SATA controllers to PATA mode. (Default) RAID Enables RAID for the SATA controllers. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. SATA Port0-3 Native Mode Specifies the operating mode of the integrated SATA controllers. Disabled Allows the SATA controllers to operate in Legacy IDE mode. In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with other device. Set this option to Disabled if you wish to install operating systems that do not support Native mode. (Default) Enabled Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode if you wish to install operating systems that support Native mode. USB 1.0 Controller Enables or disables the integrated USB 1.0 controller. (Default: Enabled) Disabled will turn off all of the USB functionalities below. USB 2.0 Controller Enables or disables the integrated USB 2.0 controller. (Default: Enabled) USB Keyboard Function Allows USB keyboard to be used in MS-DOS. (Default: Disabled) - 51 - BIOS Setup
Page 1 and 2: GA-EX58-UD3R LGA1366 socket motherb
Page 3 and 4: Copyright © 2008 GIGA-BYTE TECHNOL
Page 5 and 6: Chapter 3 Drivers Installation ....
Page 7 and 8: GA-EX58-UD3R Motherboard Layout KB_
Page 9 and 10: Chapter 1 Hardware Installation 1-1
Page 11 and 12: Internal Connectors • 1 x 24-pin
Page 13 and 14: 1-3 Installing the CPU and CPU Cool
Page 15 and 16: 1-3-2 Installing the CPU Cooler Fol
Page 17 and 18: 1-4-2 Installing a Memory Before in
Page 19 and 20: 1-6 Back Panel Connectors PS/2 Keyb
Page 21 and 22: 1-7 Internal Connectors 1 3 23 5 2
Page 23 and 24: 3/4/5) CPU_FAN / SYS_FAN1 / SYS_FAN
Page 25 and 26: 9) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Co
Page 27 and 28: 13) F_PANEL (Front Panel Header) Co
Page 29 and 30: 16) SPDIF_I (S/PDIF In Header, Red)
Page 31 and 32: 20) COMA (Serial Port Header, White
Page 33 and 34: Chapter 2 BIOS Setup BIOS (Basic In
Page 35 and 36: 2-2 The Main Menu Once you enter th
Page 37 and 38: 2-3 MB Intelligent Tweaker(M.I.T.)
Page 39 and 40: CPU Thermal Monitor (Note) Enables
Page 41 and 42: Advanced Clock Control CPU Clock Dr
Page 43 and 44: Channel A/B/C Advanced Timing Contr
Page 45 and 46: ******* Advanced Voltage Control **
Page 47 and 48: 2-4 Standard CMOS Features CMOS Set
Page 49: 2-5 Advanced BIOS Features CMOS Set
Page 53 and 54: When LAN Cable Is Functioning Norma
Page 55 and 56: Resume by Alarm Determines whether
Page 57 and 58: Current Voltage(V) Vcore / DDR15V /
Page 59 and 60: 2-11 Set Supervisor/User Password C
Page 61 and 62: Chapter 3 Drivers Installation •
Page 63 and 64: 3-4 Contact Click the URL on this p
Page 65 and 66: Chapter 4 Unique Features 4-1 Xpres
Page 67 and 68: D. Using the Restore Function in Xp
Page 69 and 70: B. Updating the BIOS When updating
Page 71 and 72: 4-2-2 Updating the BIOS with the @B
Page 73 and 74: 4-4 Dynamic Energy Saver Advanced G
Page 75 and 76: 4-5 Q-Share Q-Share is an easy and
Page 77 and 78: Chapter 5 Appendix 5-1 Configuring
Page 79 and 80: C. Configuring a RAID array in RAID
Page 81 and 82: Step 5: Enter the array capacity an
Page 83 and 84: 5-1-2 Configuring GIGABYTE SATA2 SA
Page 85 and 86: Create a RAID Array: In the main sc
Page 87 and 88: When finished, the new RAID array w
Page 89 and 90: 5-1-3 Making a SATA RAID/AHCI Drive
Page 91 and 92: For GIGABYTE SATA2 SATA controller:
Page 93 and 94: Step 3: When a screen as shown in F
Page 95 and 96: Step 3: When a screen as shown in F
Page 97 and 98: Performing the Rebuild in the Opera
Page 99 and 100: Rebuilding in the operating system
Page 101 and 102:
Step 2: Connect an audio device to
Page 103 and 104:
B. S/PDIF Out: The S/PDIF out jacks
Page 105 and 106:
Step 4: To raise the recording and
Page 107 and 108:
5-3 Troubleshooting 5-3-1 Frequentl
Page 109 and 110:
A When the computer is turned on, i
Page 111 and 112:
Finally, we suggest that you practi
Page 113 and 114:
- 113 - Appendix
Page 115 and 116:
- 115 - Appendix
Page 117 and 118:
- 117 - Appendix
Page 119 and 120:
Contact Us • GIGA-BYTE TECHNOLOGY
show all

GA-EX58-UD3R - Hardware

Create successful ePaper yourself

Delete template?

Save as template?