GA-EX58-UD3R - Hardware

More documents

Recommendations

Info

Different Ranks Options are: Auto (default), 1~8. On The Same Ranks Options are: Auto (default), 1~13. >>>>> Channel A/B/C Reads Followed by Writes Different DIMMs Options are: Auto (default), 1~15. Different Ranks Options are: Auto (default), 1~15. On The Same Rank Options are: Auto (default), 1~15. >>>>> Channel A/B/C Reads Followed by Reads Different DIMMs Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8. On The Same Rank Options are: Auto (default), 1~2. >>>>> Channel A/B/C Writes Followed by Writes Different DIMMs Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8. On The Same Rank Options are: Auto (default), 1~2. GA-EX58-UD3R Motherboard - 44 -
******* Advanced Voltage Control ******* CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Voltage Control Voltage Types Normal Current ------------------------------------------------------------------ >>> CPU Load-Line Calibration [Disabled] CPU Vcore 1.22500V [Auto] QPI/Vtt Voltage 1.150V [Auto] CPU PLL 1.800V [Auto] >>> MCH/ICH PCIE 1.500V [Auto] QPI PLL 1.100V [Auto] IOH Core 1.100V [Auto ICH I/O 1.500V [Auto] ICH Core 1.100V [Auto] >>> DRAM DRAM Voltage 1.500V [Auto] DRAM Termination 0.750V [Auto] Ch-A Data VRef. 0.750V [Auto] Ch-B Data VRef. 0.750V [Auto] Ch-C Data VRef. 0.750V [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Voltage Control Ch-A Address VRef. 0.750V [Auto] Ch-B Address VRef. 0.750V [Auto] Ch-C Address VRef. 0.750V [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>> CPU Load-Line Calibration Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel specifications. (Default: Disabled) CPU Vcore The default is Auto. QPI/Vtt Voltage The default is Auto. - 45 - BIOS Setup
Page 1 and 2: GA-EX58-UD3R LGA1366 socket motherb
Page 3 and 4: Copyright © 2008 GIGA-BYTE TECHNOL
Page 5 and 6: Chapter 3 Drivers Installation ....
Page 7 and 8: GA-EX58-UD3R Motherboard Layout KB_
Page 9 and 10: Chapter 1 Hardware Installation 1-1
Page 11 and 12: Internal Connectors • 1 x 24-pin
Page 13 and 14: 1-3 Installing the CPU and CPU Cool
Page 15 and 16: 1-3-2 Installing the CPU Cooler Fol
Page 17 and 18: 1-4-2 Installing a Memory Before in
Page 19 and 20: 1-6 Back Panel Connectors PS/2 Keyb
Page 21 and 22: 1-7 Internal Connectors 1 3 23 5 2
Page 23 and 24: 3/4/5) CPU_FAN / SYS_FAN1 / SYS_FAN
Page 25 and 26: 9) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Co
Page 27 and 28: 13) F_PANEL (Front Panel Header) Co
Page 29 and 30: 16) SPDIF_I (S/PDIF In Header, Red)
Page 31 and 32: 20) COMA (Serial Port Header, White
Page 33 and 34: Chapter 2 BIOS Setup BIOS (Basic In
Page 35 and 36: 2-2 The Main Menu Once you enter th
Page 37 and 38: 2-3 MB Intelligent Tweaker(M.I.T.)
Page 39 and 40: CPU Thermal Monitor (Note) Enables
Page 41 and 42: Advanced Clock Control CPU Clock Dr
Page 43: Channel A/B/C Advanced Timing Contr
Page 47 and 48: 2-4 Standard CMOS Features CMOS Set
Page 49 and 50: 2-5 Advanced BIOS Features CMOS Set
Page 51 and 52: 2-6 Integrated Peripherals CMOS Set
Page 53 and 54: When LAN Cable Is Functioning Norma
Page 55 and 56: Resume by Alarm Determines whether
Page 57 and 58: Current Voltage(V) Vcore / DDR15V /
Page 59 and 60: 2-11 Set Supervisor/User Password C
Page 61 and 62: Chapter 3 Drivers Installation •
Page 63 and 64: 3-4 Contact Click the URL on this p
Page 65 and 66: Chapter 4 Unique Features 4-1 Xpres
Page 67 and 68: D. Using the Restore Function in Xp
Page 69 and 70: B. Updating the BIOS When updating
Page 71 and 72: 4-2-2 Updating the BIOS with the @B
Page 73 and 74: 4-4 Dynamic Energy Saver Advanced G
Page 75 and 76: 4-5 Q-Share Q-Share is an easy and
Page 77 and 78: Chapter 5 Appendix 5-1 Configuring
Page 79 and 80: C. Configuring a RAID array in RAID
Page 81 and 82: Step 5: Enter the array capacity an
Page 83 and 84: 5-1-2 Configuring GIGABYTE SATA2 SA
Page 85 and 86: Create a RAID Array: In the main sc
Page 87 and 88: When finished, the new RAID array w
Page 89 and 90: 5-1-3 Making a SATA RAID/AHCI Drive
Page 91 and 92: For GIGABYTE SATA2 SATA controller:
Page 93 and 94: Step 3: When a screen as shown in F
Page 95 and 96:
Step 3: When a screen as shown in F
Page 97 and 98:
Performing the Rebuild in the Opera
Page 99 and 100:
Rebuilding in the operating system
Page 101 and 102:
Step 2: Connect an audio device to
Page 103 and 104:
B. S/PDIF Out: The S/PDIF out jacks
Page 105 and 106:
Step 4: To raise the recording and
Page 107 and 108:
5-3 Troubleshooting 5-3-1 Frequentl
Page 109 and 110:
A When the computer is turned on, i
Page 111 and 112:
Finally, we suggest that you practi
Page 113 and 114:
- 113 - Appendix
Page 115 and 116:
- 115 - Appendix
Page 117 and 118:
- 117 - Appendix
Page 119 and 120:
Contact Us • GIGA-BYTE TECHNOLOGY
show all

GA-EX58-UD3R - Hardware

Create successful ePaper yourself

Delete template?

Save as template?