Catalog LV 70 2011 - Low & Medium Voltage - Siemens

BD01 System — 40 ... 160 A
© Siemens AG 2011
Introduction
Feeder units
Two versions are available, one for 100 A and one for 160 A.
The feeder unit can be used as:
• Incoming feeder units
NSV0_00048
NSV0_00049
Molded plastic-enclosed tap-off units
Common features
• Molded-plastic enclosure
• Partially transparent cover for protective devices
• Power pick-up through silver-plated lyre-shaped contacts
• Reliable prevention of incorrect mounting
• Cable entry is from one side only (use plastic cable glands
with strain relief, not included in scope of supply).
• The tap-off unit must first be removed from the trunking before
it can be opened and the cable can be connected.
• The connecting cable should be supported separately if necessary.
Tap-off units with components fitted
• Two sizes (16 A and 32 A) for three cylindrical fuses
(10 mm × 38 mm)
• One size with 3 MW space requirement (1 MW = 18 mm)
There are various versions with fuse bases, miniature circuit
breakers, SCHUKO socket outlets and CEE socket outlets up to
and including 32 A
• End feeder units
NSV0_00052
4
NSV0_00050
BD01-AK01X/ZS
• Center feeder unit
NSV0_00053
NSV0_00051
BD01-AK02X/ZS3
Two end flanges are included in the scope of supply with each
unit.
M32, M40 and M50 cable entries are possible from four sides.
With the 160 A version, the M63 cable entry is possible on the
side. Plastic cable glands with strain relief must be used
(not included in scope of supply).
BD01-AK02M0/ CEE165A163
NSV0_00054
4/4 Siemens LV 70 · 04/2011