User Guide - Lenovo

7. Using the cursor keys, move to an item you want to set. When the item you want is highlighted, press
Enter.
8. Set the items you want to set.
9. Press F10 to exit.
10. Click Yes in the Setup Confirmation window.
To set the Security Chip, you have to open the Client Security Solution, and follow the instructions on
the screen.
Note: If your computer is a Windows 7 model, Client Security Solution is not preinstalled on your system. To
configure the security chip, you need to download the latest version of Client Security Solution from the
Lenovo Web site. To download Client Security Solution, go to: http://www.lenovo.com/support. Then
follow the instructions on the screen.
Using a fingerprint reader
This section introduces how to use a fingerprint reader in your computer.
Using a fingerprint reader in ThinkPad X220 and X220i
Depending on the options you ordered, your computer may have an integrated fingerprint reader. By
enrolling your fingerprint and associating it with a power-on password, a hard disk password, or both
passwords beforehand, you can start the computer, log on to the system, and enter the ThinkPad Setup by
swiping your finger over the reader, without typing a password. Thus fingerprint authentication can replace
passwords and enable simple and secure user access.
For more advanced security, Client Security Solution can be installed. The software is compatible with a
variety of user authentication mechanisms, such as those involving fingerprint authentication. This fingerprint
reader can work with the software.
Note: If your computer is a Windows 7 model, Client Security Solution is not preinstalled on it.
Enrolling your fingerprint
1. Turn on your computer.
2. To start Lenovo Fingerprint software, refer to “Fingerprint Software” on page 35.
3. Follow the instructions on the screen to enroll your fingerprint. For details, refer to the Help for the
program.
Chapter 4. Security 97