You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installing the Windows Vista Update Module Package<br />
The Windows Vista Update Modules are in the following directory:<br />
C:\SWTOOLS\OSFIXES\.<br />
The name of each subfolder is the number of a fix module. For information about each fix module, go to<br />
the Microsoft Knowledge Base homepage at http://support.microsoft.com/, type the number of the fix<br />
module you need in the search field, and click Search.<br />
Note: The Web site address might change without notice. If the homepage is not displayed, search for it<br />
from the Microsoft top page.<br />
To install a fix module, run the .exe file in a subfolder and follow the instructions on the screen.<br />
Note: If you remove the hard disk drive from the computer with a single-core processor and install it on a<br />
computer with a dual-core processor, you can get access to the hard disk drive. The opposite, however, is<br />
not true: If you remove the hard disk drive from a computer with a dual-core processor and install it on a<br />
computer with a single-core processor, you cannot get access to the hard disk drive.<br />
Installing Windows XP<br />
Before you start, print these instructions.<br />
Note: Only ThinkPad X220 and ThinkPad X220i support Windows XP.<br />
Note: Your computer supports Windows XP with Service Pack 3. Before you install the Windows XP Service<br />
Pack 3, make sure you install the Windows XP Service Pack 2 first.<br />
You must install Intel Rapid Storage Technology Driver before installing the operating system. To install it, you<br />
may need to attach a diskette drive to your computer. If you have a diskette drive, follow the procedure below.<br />
Before installing the operating system, install Intel Rapid Storage Technology Driver as follows:<br />
Note: Be sure to install Intel Rapid Storage Technology Driver before installing the operating system.<br />
Otherwise your computer will not respond; it will only display a blue screen.<br />
1. Attach a diskette drive to your computer.<br />
2. Copy Intel Rapid Storage Technology Driver from C:\SWTOOLS\DRIVERS\IMSM to a diskette.<br />
3. To make sure that SATA AHCI is enabled, start the ThinkPad Setup.<br />
4. Select Config.<br />
5. Select Serial ATA (SATA).<br />
6. Select AHCI .<br />
7. Change the startup sequence of your computer. Select Startup menu.<br />
8. Select UEFI/Legacy Boot.<br />
9. Select Both or Legacy Only.<br />
10. Press F10.<br />
11. Insert the CD for Windows XP integrated with Service Pack 2 into the CD or DVD drive, and restart the<br />
computer.<br />
12. To install a third-party SCSI driver first, press F6.<br />
13. When prompted, select S for Specify Additional Device.<br />
14. When prompted, insert the diskette that you created in step 2, and press Enter.<br />
15. Scroll the list of drivers. If the SATA setting of you computer is set to AHCI, select Intel ® Mobile<br />
Express Chipset SATA AHCI Controller.<br />
176 <strong>User</strong> <strong>Guide</strong>