You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 6. Config menu items (continued)<br />
Menu item Submenu item Selection Comments<br />
Intel AMT<br />
Security menu items<br />
Table 7. Security menu items<br />
Intel AMT Control • Disabled<br />
• Enabled<br />
If you select “Enabled”, Intel<br />
AMT (Active Management<br />
Technology) is configured<br />
and additional setup items<br />
are provided in MEBx<br />
(Management Engine BIOS<br />
Extension) Setup.<br />
Note: You can enter MEBx<br />
Setup menu by pressing<br />
Ctrl-P key combination in<br />
Startup Interrupt Menu. To<br />
display the Startup Interrupt<br />
Menu, press ThinkVantage<br />
button or Enter key during<br />
POST.<br />
CIRA Timeout 0-255 Set timeout option for<br />
CIRA connection to be<br />
established. 1 though 254<br />
seconds are selectable.<br />
Console Type • PC-ANSI<br />
• VT100+<br />
• VT-UTF8<br />
Menu item Submenu item Selection Comments<br />
If you select “0”, use 60<br />
seconds as default timeout<br />
value.<br />
If you select “255”, waiting<br />
time for establishing a<br />
connection is unlimited.<br />
Select the console type for<br />
AMT.<br />
Note: This console type<br />
should match the Intel AMT<br />
remote console.<br />
Password Refer to “Security menu”<br />
on page 183 and “Using<br />
passwords” on page 89.<br />
Fingerprint<br />
192 <strong>User</strong> <strong>Guide</strong><br />
Predesktop Authentication • Disabled<br />
• Enabled<br />
Reader Priority • External ➙ Internal<br />
• Internal Only<br />
Enable or disable fingerprint<br />
authentication before the<br />
operating system is loaded.<br />
If External ➙ Internal<br />
is selected, an external<br />
fingerprint reader is used<br />
if attached. Otherwise, an<br />
internal fingerprint reader<br />
is used. If Internal Only<br />
is selected, an internal<br />
fingerprint reader is used.